Building Instructions -

• Java

Building instructions for the barrier mission model. The model is used in the Parking Control mission of FLLCasts Off-season Challenge 2019.

Building instructions for the transportation stands mission models. The models are used in the Precise driving mission of FLLCasts Off-season Challenge 2019.

This robot is robot based on Roberto Chassis. It is equiped with a pushing rack. You can add something to the rack so it can do some other jobs.

The program for this robot is at programs/ajk7i1-roberto-with-rack-for-pushing-to-the-left-and-right-side-vex-iq-robot.

In this 3D scheme, you can see how the motor driver is connected to the Raspberry Pi and to the motor. Follow the steps in the instructions one by one and you will have successfully connected the motor to the Raspberry PI

A simple robot for classes, with Vex IQ Touch Sensor.

Instructions for building module 4 version 1 of the Ugbroid - rear wheels.

User this flywheels construction for experiments in physics. Start rotating the wheel and they would accumulate energy. You can try to calculate this energy and to measure how fast it would be consumed.

The construction is built with LEGO Mindstorms EV3

Building instructions for this part of the BigDaddy competition robot

The rotation frame requiers an NXT large double gear wheel that is not available at the EV3 set. You can use the instructions below to construct a similar mechanism from Mindstorms EV3 set

This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot. It is an experiment we did that didn't work out for the FLL 2023-2024 MASTERPIECE field, but is interesting nonetheless. It shows how you can take an out-of-box robot and put a steering mechanism on it.

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment uses rubber parts to compensate for the lack of precision in positioning the robot near the mission model. That was needed since at the time that this attachment was used, the robot had moved a long distance since its last aligning at a wall or other mission models.

This attachment accomplishes three missions from the FIRST LEGO League MASTERPIECE. It is for the Chain Monster Robot. It accomplishes Mission 10 - Sound Mixer. It also partially accomplishes Mission 14 - Audience Delivery.

This attachment is accomplishing three missions from the FIRST LEGO League 2023-2024. It is for the Chain Monster Robot. It solve mission 11 - Light show. It partially solves mission 14 - Audience delivery.

These are 3D Building Instructions for M10 Send over the Submersible mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Send over the Submersible for additional building possibilities.

These are 3D Building Instructions for M09 Unexpected Encounter mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Unexpected Encounter for additional building possibilities.

In Finnish, "kuhmu" means "bump."

This robot was designed to resemble a bumper car and to teach a very important lesson about inertia and the center of mass! Its hub is attached pinlessly to the construction, allowing you to move it around and experiment with the robot's center of mass. The robot moves using two wheels attached to two medium motors. It also has a force sensor in front to detect when it bumps into something!

This is a Kriket box robot attachment used for pushing a lever and precisely dropping energy units. It is used for FIRST LEGO League 2022-2023 SUPER POWERED mission call M03 Energy storage and M11 Hydroelectric Dam. This is a multi-purpose attachment that can do more than one thing at a time.

This is an attachment for the Chain Monster robot and it accomplished three missions that are all push and deliver. It technically is not used for the M09 dinosaur toy, but this is because the toy is on the robot while the attachment is below the robot