These are 3D Building Instructions for M09 Unexpected Encounter mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Unexpected Encounter for additional building possibilities.
A simple line-following robot, Seon, can be programmed to follow a line. However, its design does not support basic wobble or "ducky" line-following, requiring a more advanced method instead.
In Guarani, "tembias" means "stories."
The robot moves using two motors with large wheels. At the front, it has a force sensor to detect obstacles.
In Hindi, "tantr" means "gearwheel."
The robot moves using two medium motors with small wheels. It has multiple gearwheels attached to the moving wheels, giving it a more complex appearance. In reality, these gears are just for making the robot look cooler. However, you can program them to perform any function you desire!
This attachment was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot. It is meant to help the robot complete the 9th mission of the FLL Cargo Connect competition.
3D building instructions for the watch television LEGO mission model from the FLL 2022 competition
Attachment for grabbing loops build from LEGO MINDSTORMS Robot Inventor 51515 set. We use this robot attachment to accomplish missions with loops at FIRST LEGO League. Well, we use the principle, that is what's important. Check out the attachment and the course to understand the principle of grabbing loops.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
One pumpkin spice latte coming right up! This robot is made to serve the best drinks in the whole continent! It is one of the simpler robots that can be made with the LEGO SPIKE Prime set and it uses two medium motors to move around. The coolest part about the robot is the cup holder where a "cup" can be attached or removed. Bottoms up!
This is the attachment to accomplish Fll 2019 M08 mission with the Dominator robot. You can see how to attach the attachment to the robot in this tutorial.
In this 3D scheme, you can see how the motor driver is connected to the Raspberry Pi and to the motor. Follow the steps in the instructions one by one and you will have successfully connected the motor to the Raspberry PI
It's the second version of VEX IQ Easy Bot. It's simple as the first one, but the motors are rotated.
Instructions for building module 4 version 1 of the Ugbroid - rear wheels.
Building instructions for building rear wheels - module 4 version 2 of the Ugbroid.
Building instructions for a LEGO Mindstorms EV3 Truck Robot Attachment for the FIRST LEGO League 2013 Nature's Fury robotics competition
- note that I have added two angled beams and an axle to illustrate how you could use the slide as an active attachmen;
You can attach a frame around the front wheels to make them more stable and to allow for better aligning. The module extends the front wheel built at BigDaddy Front - front wheels mechanism module for a large LEGO Mindstorms Competition Robot
