
Truck mission model. FLLCasts Off-season Challenge 2019
Building instructions for the truck mission model. The model is used in the Road assistance mission of FLLCasts Off-season Challenge 2019.
- #782
- 22 May 2019
Building instructions for the truck mission model. The model is used in the Road assistance mission of FLLCasts Off-season Challenge 2019.
Building instructions for the bowling pins mission models. The models are used in the Bowling mission of FLLCasts Off-season Challenge 2019.
Attachment for lifting object, especially hex balls if you have them from the Crossover competition.
Building instructions for a VEX IQ attachment for catching hex balls
Building instructions for building rear wheels - module 4 version 2 of the Ugbroid.
Building instructions for a LEGO Mindstorms EV3 Truck Robot Attachment for the FIRST LEGO League 2013 Nature's Fury robotics competition
Building instructions for the Rubber Band Attachment
- note that you could attach it to the brick both sides, depending on which technique you would like to test. Use the video as a reference.
This simple robot is designed to demonstrate the most basic line following methods, primarily the wobble or "ducky" line following method.
These are 3D Building Instructions for the Audience Delivery mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.
This attachment was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot. It is meant to help the robot complete the 9th mission of the FLL Cargo Connect competition.
These are 3D building instructions for an active pinless attachment from LEGO Education SPIKE Prime set. The attachment is used along with the Gazon robot to push mission models.
3D building instructions for the watch television LEGO mission model from the FLL 2022 competition
Building instructions for a LEGO SPIKE Robot that we call the Five-Minute Bot because it could be built in Five Minutes.
This flip attachment from LEGO MINDSTORMS Robot Inventor 51515 set is design to flip parts. It can flip a manhole for example, but could also flip other parts. The principle of flipping is quite interesting as it uses two axles and a border.
Forth version of a reusable gear attachment. Again, it powers two axles and this time there is a lever connected to one of the axles.
First version of a reusable gear attachment. By following the same principle for assembling the attachments you can change the direction of the gear wheels and build powerful attachments that could accomplish missions in any direction.