Building Instructions -

• EV3-G

Purpose

We want students to be able to easily find the parts and to put the parts back in the designated compartments.

Printing instructions

Files are printed on both sides of 160-gram sheet of paper A3 format.

The sorting sheet is designed to fit in the cover of the box. To gather in the lid, the excess parts of the printed sheet must be cut off the markers on the front of the sheet.

To extend the life of the sheets, you can laminate them either with a "laminate matte" or a simple laminate. The disadvantage of the simple laminate is that there is a lot of gloss. The disadvantage of laminate matte is that it has to be sealed with a clear PVA C-200 adhesive to prevent it from opening over time.

Turning direction

We recommend printing doublesided and turning over the "short edge", like a book. If you decide, you may flip the printed result over the long side. Both options are available at you local print center.

It's the third version of the VEX IQ Easy Bot with rotated Robot Brain and castor wheel.

- you should attach it to the motor, depending on the orientation of the motor.

- you should attach it to the motor, depending on the orientation of the motor

An attachment for accomplishing the Cargo Connect M01 innovation project model mission. It is used to guide the mission model.>

3D building instructions for the Dinosaur toy mission model from the FLL 2022 competition. Find the parts in Bag 9 of the set

Allunagio in Italian means to arrive or touch the Moon.

This simple robot is designed to be constructed in a short lesson. It has two motors for movement and a controller hub.

Drop mission model developed with a LEGO Education SPIKE Prime. The mission is to move and drop and object in the mission model. This triggers the mission model. It is a popular mission at FLL competitions. In 3D building instructions for you to construct.

Go, robot, grab the ball!

If you want to have some fun and play some ball grabbing with your Mindstorms Robot Inventor 51515 set, these are the building instructions you'll need. As you probably know, Tricky is the smallest robot made from this set. With this ball grabbing attachment, you could program Tricky to grab the Mindstorms/Duplo ball, which is included in the set, and place it wherever you want.

You can find the LEGO set, with which this was built, by following this link.

You can find other attachments for Tricky, by following the links below:

1. Basketball attachment
2. Kick the ball attachment
3. Writing attachment
4. Turning attachment

You can find constructions created to play with Tricky, by following the links below:

1. Bowling Pins
2. Football Goal
3. Chain Reaction
4. Basketball hoop

These are instructions on how to build the:

• Game Cubes
• Health Units
• Cell phone
• Coach Pins
• Precision Tokens

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Pull-up Bar

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Slide
• Slide Figures

You can find more building instructions and tips and tricks about the competition on this page.

This is the attachment to accomplish Fll 2019 M10 mission with the Dominator robot. You can see how to attach the attachment to the robot in this tutorial.

As you might have seen, recently all the cool kids build tensegrity structures. So we decided to make one for those of you who have a Spike prime set and want to build one themselves! In addition this tensegrity structure requires only parts from the set, which means you don't need to tie any strings on beams or other parts!

At the top of the structure we have two fully functional motors! Can you make something cool with them?

This is a movement module, that works like real boat paddles! It consists of two paddles, each connected to a large EV3 motor. The module can be connected with other modules to make a robot that moves like a boat!