This is an attachment for the Kriket Box robot that accomplishes multiple missions. The missions are connected with Push and Collect actions and are from the FIRST LEGO League 2022-2023 SUPER POWERED competition. The attachment is a little different than the recording because we improved it a little after that
An attachment for accomplishing the Cargo Connect M01 innovation project model mission. It is used to guide the mission model.>
3D building instructions for the Dinosaur toy mission model from the FLL 2022 competition. Find the parts in Bag 9 of the set
This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Cell Phone mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.
This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Tire Flip mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.
Drop mission model developed with a LEGO Education SPIKE Prime. The mission is to move and drop and object in the mission model. This triggers the mission model. It is a popular mission at FLL competitions. In 3D building instructions for you to construct.
Go, robot, grab the ball!
If you want to have some fun and play some ball grabbing with your Mindstorms Robot Inventor 51515 set, these are the building instructions you'll need. As you probably know, Tricky is the smallest robot made from this set. With this ball grabbing attachment, you could program Tricky to grab the Mindstorms/Duplo ball, which is included in the set, and place it wherever you want.
You can find the LEGO set, with which this was built, by following this link.
You can find other attachments for Tricky, by following the links below:
You can find constructions created to play with Tricky, by following the links below:
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
This is the attachment to accomplish Fll 2019 M10 mission with the Dominator robot. You can see how to attach the attachment to the robot in this tutorial.
This is a steering mechanism made to look like a fish tail, so that you can make the coolest fish robot that steers like a fish. It uses a medium motor to move left and right. You can combine it with other modules to make your sea creature robot with a tail!
Building instructions for the container mission models. The models are used in the Automated delivery mission of FLLCasts Off-season Challenge 2019.
Building instructions for the bowling pins mission models. The models are used in the Bowling mission of FLLCasts Off-season Challenge 2019.
Where do you keep your robots? We like to keep them ordered....
Actually we lied. It is almost always a mess wtih boxes and parts everywhere. We had sum FUN building this IKEA Billy and putting some of the FIRST LEGO League Mission Models.
We want students to be able to easily find the parts and to put the parts back in the designated compartments.
Files are printed on both sides of 160-gram sheet of paper A3 format.
The sorting sheet is designed to fit in the cover of the box. To gather in the lid, the excess parts of the printed sheet must be cut off the markers on the front of the sheet.
To extend the life of the sheets, you can laminate them either with a "laminate matte" or a simple laminate. The disadvantage of the simple laminate is that there is a lot of gloss. The disadvantage of laminate matte is that it has to be sealed with a clear PVA C-200 adhesive to prevent it from opening over time.
We recommend printing doublesided and turning over the "short edge", like a book. If you decide, you may flip the printed result over the long side. Both options are available at you local print center.
It's the third version of the VEX IQ Easy Bot with rotated Robot Brain and castor wheel.
Building instructions for a VEX IQ attachment for throwing balls with rubber bands.
Building instructions for Module 1 of the Modular EV3 LEGO Mindstorms vehicle - the Trunk.
The goal of this robot is to teach students how to build modular robots. This first part is just one of the modules.
LEGO Mindstorms Robot Base for a high placed attachment for containing ping pong balls. It is interesting how the balance is achieved with such an attachment. It was only one of the version in a series of LEGO Mindstorms Robots for World Robotics Olympiad.
