Building Instructions -

• Ubuntu

This box is meant to be used in missions. The long body of this box makes it easy to grab with a large variety of attachments.

These are instructions on how to build the:

• White Building Units
• Blue Building Units
• Building Upgrades

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

This is a print ready vinyl mat that contains 7 barcodes and 15 products. The barcodes are not symmetrical and can yield different product result depending from the scanning direction - left to right or right to left. This mat is used in lesson 6 of level 3.5 Measurement tools.

This are the building instructions for a mechanism, collecting cubes. It is designed as an attachment for VEX Robot Base 5 and can be used to solve the VEX IQ Challenge High rise 2014-2015.

Building instructions for module 3 of the Ugbroid - the drive mechanism.

These are 3D Building Instructions for M11 Raise the Mast mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Raise the Mast for additional building possibilities.

This is an attachment for accomplishing missions from FIRST LEGO League 2022-2023 SUPER POWERED competition. We use this attachment additionally to another one that you can see the the lessons for this attachment. The goal is to execute the actions of Push and Collect, and this is the perfect passive attachment for this.

These are 3D Building Instructions for the Movie Set mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

These are 3D Building Instructions for the Masterpiece mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

3D building instructions for the solar farm energy unit in FIRST LEGO League 2022. Find the parts in Bag 1

In Ukrainian, "Mandrivnyk" means "wanderer" or "voyager."

This robot is shaped like a rocket. It moves with two medium motors in the back. Safe travels!

This is an attachment for the top of the robot and the attachment is used for lifting different parts. It is reusable as we could change the lever and use the attachment for a number of different missions.

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Pull-up bar mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.

Here are the building instructions for the Turning attachment for Tricky - the Mindstorms 51515 Robot Inventor robot. Tricky might be the smallest robot, built with this set, but it will surprise you with its abilities to spin the ball. If you build this Turning attachment for Tricky, you could try to play a crazy little bowling game with it. As the robot is spinning the ball, you can program it to move forward and then stop, so the ball could go forward (hopefully towards the bowling pins). You can play to see who will be the first to make a strike. The Mindstorms/Duplo ball and the bowling pins are included in the set.

You can find the LEGO set, with which this was built, by following this link

You can find other attachments for Tricky, by following the links below:

1. Basketball attachment
2. Kick the ball attachment
3. Writing attachment
4. Ball grabbing attachment

You can find constructions created to play with Tricky, by following the links below:

1. Bowling Pins
2. Football Goal
3. Chain Reaction
4. Basketball hoop

These are instructions on how to build the:

• Weight Machine

You can find more building instructions and tips and tricks about the competition on this page.

This is an addition for Welder - super simple Motorcycle built with LEGO Mindstorms EV3. It allows the motorcycle to drive on its back wheel and perform cool tricks that way. Exactly what tricks, you will have to find on your own!

This is the field used in FLLCasts Off-season Challenge 2019. The pdf should be downloaded and printed 1:1. It is best if it is printed on durable canvas such as vinyl. Although we do not recomend it, the field can be printed on regular paper.

This is the attachment of Team "Nightbeast", with which they :
1. Inserts the Tube Module into the Habitation Hub port, west side 
2. Move all four Core Samples so they are no longer touching the axle that held them in the Core Site Model
3. Place the Gas Core Sample completely in Base
From missions M05 and M06 from FLL Into Orbit Challenge
 

This is a little robot that doesn't like its switch touched. It will return the switch back every time it's touched and react in a variety of ways.

The program for controlling the robot is available at /programs/wc7iqy-program-for-ev3-finger-bot

It's the second version of the Robot Base 4, but with rotated inside motor.