This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Pull-up bar mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.
Here are the building instructions for the Turning attachment for Tricky - the Mindstorms 51515 Robot Inventor robot. Tricky might be the smallest robot, built with this set, but it will surprise you with its abilities to spin the ball. If you build this Turning attachment for Tricky, you could try to play a crazy little bowling game with it. As the robot is spinning the ball, you can program it to move forward and then stop, so the ball could go forward (hopefully towards the bowling pins). You can play to see who will be the first to make a strike. The Mindstorms/Duplo ball and the bowling pins are included in the set.
You can find the LEGO set, with which this was built, by following this link
You can find other attachments for Tricky, by following the links below:
You can find constructions created to play with Tricky, by following the links below:
The name of the game? Football!
This Kick the ball attachment for Tricky - the Mindstorms 51515 Robot Inventor smallest robot - is one of our favorites. Imagine a LEGO robot playing football. It is dribbling through the center of the field, it enters the box, it strikes and... goooooooal. What a fun game to play at home, if you decide to build Tricky with this kicking attachment. Aptly named for it’s “trick shots” with the included Mindstorms/Duplo ball. After you're ready with the construction of this robot, you'll find the instructions for building the goal frame below.
You can find the LEGO set, with which this was built, by following this link.
You can find other attachments for Tricky, by following the links below:
You can find constructions created to play with Tricky, by following the links below:
This is the attachment to accomplish Fll 2019 M06 mission with the Whakatae. You can see how to attach the attachment to the robot in this tutorial to do.
It also accomplish Fll 2019 M06 mission.
Building instructions with dimensions on the ball collecting mechanism for the FIRST Technical Challenge Push Bot. The collecting mechanism should be attached to the Chassis - https://www.fllcasts.com/materials/382-ftc-push-bot-chassis-from-tetrix
It's the second version of the Robot Base 4, but with rotated inside motor.
This is an attachment for accomplishing missions from FIRST LEGO League 2022-2023 SUPER POWERED competition. We use this attachment additionally to another one that you can see the the lessons for this attachment. The goal is to execute the actions of Push and Collect, and this is the perfect passive attachment for this.
These are 3D Building Instructions for the Virtual Reality Artist mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.
This is the robot that we use to demonstrate a solution for the World Robot Olympiad 2021 Junior competition. This is a Post season solution. We never release any solutions during the season as this will have a negative impact on the competition.
We started with this robot and it has a few good ideas. It can collect two cars at the same time. We later decided to go for a more powerful robot. Check out WRO 2021 Junior: Slaimi - a post season WRO competition solution robot
3D building instructions for the Toy factory mission model from the FIRST LEGO League 2022-2023 competition. Find the parts in Bag 13
This is an attachment for the top of the robot and the attachment is used for lifting different parts. It is reusable as we could change the lever and use the attachment for a number of different missions.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
Program for this robot is at programs/uxgw6b-roberto-bot-chassis-controls-with-modkit
Building instructions for Tower Trunk. The trunk is designed to store cubes and then drop them on a desired spot. It can be used alongside Cube Collector 2 as an attachment for VEX Robot Base 1.
Building instructions for the second module of the Ugbroid robot - the Base.
Building instructions for this LEGO Mindstorms EV3 attachment for the FIRST LEGO League Nature's Fury robotics competition
