Building Instructions -

• Java

Building instruction for the power switch mission model. The model is used in the Power supply mission of FLLCasts Off-season Challenge 2019.

This is a simple chassis that uses two motors to control the robot and two omni wheels at the back for greater maneuverability.

The program for this chassis is at programs/c0oq4l-pesho-bot-chassis-controls-with-modkit

This is a disk image containing a Raspbian OS. The image is modified and set up specifically for the Perfect course. It contains all the needed files, libraries and additional tools that we would use in the course. The file is quite large so be prepared to wait some time while downloading.

Checksum: 4d85292f49a9350fcef9f2eb8fd86b77f1c6bd65ce1344848de3e201c9e1d20d

Advanced LEGO MINDSTORMS EV3 Construction. It has two rear motors and it could rotate the whole from part. It has 4 wheels and is kind of like unique in the Mindstorms world.

Building instructions are not very easy and you need LEGO Education Core and Extension Sets - 45544 and 45560. 

Apart from being advanced, it is also quite fun to try to build.

These are 3D Building Instructions for the Light Show mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

We use this attachment to demonstrate the principle of an active attachment. This is an attachment activated from the motor. It has one level attached to it. It could be reused. The attachment transfers power from the motor to the end of the lever and we can accomplish missions like the Power Switch mission from the FLLCasts Off-season mission models.

This robot may look a bit unusual. Can you guess why? The motors are placed in opposite directions - one faces forward, while the other faces backward. This means that if both motors are set to move forward, the robot will spin in place!

To make the robot move forward, one motor must turn forward while the other turns backward.

The purpose of this robot is to show that motors can be placed in different ways. They do not always face the same direction, and this must be taken into account when programming.

This is the Little Truckie, but upgraded with an arm so it can teach you to be a good driver with lager number of controls. Now you can drive it and lift things at the same time.

The programs for controlling Truckie are at:

Truckie - Easy To Drive VEX IQ Program for Modkit

Truckie Hard To Drive VEX IQ Program for Modkit

Advanced Truckie - Easy To Drive Advanced VEX IQ Program for Modkit

This is the joystick for controlling Real Steel LEGO Boxing Robot. We use the bluetooth connection for communication between the two bricks. 

It's a VEX IQ robot base with all VEX IQ Sensors. The robot has 1 x Gyro, 1 x Ultrasonic, 1x Color Sensor, 2 x Toch Sensors, 1 x Touch Led Sensor.

Building instructions for a LEGO Mindstorms EV3 robot that could be completed in about 3 minutes. Could you do it? Try it. 

We use this robot when we need something very fast for a demonstration or a small competition. Just attach the motors and you are ready. It is fast.

Background

The chance of a “serious” meteoroid hitting earth in our lifetime is extremely low, but it’s not zero, and the devastation could truly wipe us out. How will scientists and engineers keep us safe?

Mission

From west of the free-line, send one or both meteoroids independently to the meteoroid catcher. “Independently”: see also M01, Section “Scoring Requirements”.

Scores

• Meteoroid(s) touch(es) the mat in the centre section of the meteoroid catcher: 12 each
• Meteoroid(s) touch(es) the mat in either side section of the meteoroid catcher: 8 each
• Possible scores: 0, 8, 12, 16, 20, 24

Scoring Requirements

• The result must be visible at the end of the match.
• The meteoroids need to be sent over the free-line to touch the mat in the meteoroid catcher > Only allowed method. Must be observed by the referee.
• The meteoroids must be hit/released while they are clearly and completely west of the free-line. > Only allowed method. Must be observed by the referee.
• While between hit/release and scoring position, the meteoroid must be clearly independent. > Only allowed method. Must be observed by the referee.
• If ever the ring-set meteoroid is off its ring, you may remove the ring from the field by hand. This is a special exception to the rules.

(mission descriptions source https://www.first-lego-league.org/)

These are 3D Building Instructions for M05 Shark mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Shark for additional building possibilities.

This attachment is accomplishing three missions and partly two more missions from the FIRST LEGO League 2022-2023. It is for the Chain Monster robot

These are 3D Building Instructions for the Music Concert Lights and Sounds mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

These are 3D Building Instructions for the Sound Mixer mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

The name of the game? Football!

This Kick the ball attachment for Tricky - the Mindstorms 51515 Robot Inventor smallest robot - is one of our favorites. Imagine a LEGO robot playing football. It is dribbling through the center of the field, it enters the box, it strikes and... goooooooal. What a fun game to play at home, if you decide to build Tricky with this kicking attachment. Aptly named for it’s “trick shots” with the included Mindstorms/Duplo ball. After you're ready with the construction of this robot, you'll find the instructions for building the goal frame below.

You can find the LEGO set, with which this was built, by following this link.

You can find other attachments for Tricky, by following the links below:

1. Basketball attachment
2. Writing attachment
3. Ball grabbing attachment
4. Turning attachment

You can find constructions created to play with Tricky, by following the links below:

1. Bowling Pins
2. Football Goal
3. Chain Reaction
4. Basketball hoop

These are the building instructions for the Writing attachment for Tricky - the Mindstorms 51515 Robot Inventor's smallest robot. If you build this attachment, you can program Tricky to write different things with its pen by moving. The animation in the instructions below will give you a better perspective for its abilities.

You can find the LEGO set, with which this was built, by following this link.

You can find other attachments for Tricky, by following the links below:

1. Basketball attachment
2. Kick the ball attachment
3. Ball grabbing attachment
4. Turning attachment

You can find constructions created to play with Tricky, by following the links below:

1. Bowling Pins
2. Football Goal
3. Chain Reaction
4. Basketball hoop

This box is meant to be used in missions. The long body of this box makes it easy to grab with a large variety of attachments.