The kinesthetic and memory game works with a program you can download from here. In these instructions you will see the 7 modules from which it is built:
This robot is meant to be very modular and to enable its owner to upgrade it and modify it.
This module is meant to be used in EV3 Kinesthetic and Memory Game and is attached to the base of the robot. This module uses the rotation sensor in the medium motor to detect how much the players had turned its wheel.
Meet Kiddo, smaller sister of Roller Coaster. It is smaller, easier to build and easier to control box robot with X-Y moving plate.
The goal of this robot is to have one complex attachment that could move in four directions. With such an attachment you can solve a lot of complex tasks without loosing time changing attachments. It is also quite sturdy and packed
This module is meant to be used in EV3 Kinesthetic and Memory Game and is attached to the base of the robot. This module uses the color sensor to detect the colors on its wheel.
This module is meant to be used in EV3 Kinesthetic and Memory Game and is attached to the base of the robot. This module uses the ultrasonic sensor to detect the hands of the player. Attention must be paid to where the module is attached since it can be activated by accident if the player reaches for another module over this one.
Here is an idea. What if a robot does not need attachments. What if there is one special attachment on the front that could do most of the work? Probably an attachment that allows you to move a lever in any direction.
This here is a Box Robot with X - Y axys plane. This robot doesn't need active attachments because it has X - Y table that do the job. Imagine that there is a plane on the front of the robot. With the rack mechanism you can move to any coordinates on this plane.
We have a lot of ideas how to make it even better. We will try to release them in the next few versions.
This module is meant to be used in EV3 Kinesthetic and Memory Game and is attached to the base of the robot. This module uses the rotary sensor, embedded in every motor, to detect when the player has pulled the lever.
This module is meant to be used in EV3 Kinesthetic and Memory Game and is attached to the base of the robot. This module uses the gyro sensor to detect when it is hit, by observing the angular rate.
This attachment is meant to be built on the robot Francesco 2. When the red connector for the transmission connects the two axles for the rear gear wheels, the differential locks and the motor starts evenly transferring its power to both wheels.
When the red connector for the transmission is pushed to the side, the differential unlocks and once again transfers its power to the wheel with least resistance.
You can see empty beams hovering over this attachment. They are there so you can attach a lever construction over it, to help with the locking and unlocking of the differential. Similar leaver can be seen in the robot Catapult.
This is the base module of EV3 Kinesthetic and Memory Game. The goal of this module is to present a variety of places for the rest of the modules to be attached.
This module is meant to be used in EV3 Kinesthetic and Memory Game and is attached to the base of the robot. This is the simplest module for constructing and programming. At the bottom, a channel is left for the cable to pass through.
This is an addition for Welder - super simple Motorcycle built with LEGO Mindstorms EV3. It allows the motorcycle to drive on its back wheel and perform cool tricks that way. Exactly what tricks, you will have to find on your own!
These are instructions on how to build the:
for the FIRST LEGO League 2019-2020 City Shaper Challenge.
You can find more building instructions and tips and tricks about the competition on this page.
These are instructions on how to build the:
for the FIRST LEGO League 2019-2020 City Shaper Challenge.
You can find more building instructions and tips and tricks about the competition on this page.
These are instructions on how to build the:
for the FIRST LEGO League 2019-2020 City Shaper Challenge.
You can find more building instructions and tips and tricks about the competition on this page.
These are instructions on how to build the:
for the FIRST LEGO League 2019-2020 City Shaper Challenge.
You can find more building instructions and tips and tricks about the competition on this page.
These are instructions on how to build the:
for the FIRST LEGO League 2019-2020 City Shaper Challenge.
You can find more building instructions and tips and tricks about the competition on this page.
These are instructions on how to build the:
for the FIRST LEGO League 2019-2020 City Shaper Challenge.
You can find more building instructions and tips and tricks about the competition on this page.
These are instructions on how to build the:
for the FIRST LEGO League 2019-2020 City Shaper Challenge.
You can find more building instructions and tips and tricks about the competition on this page.
