In Bulgarian, "kolelo" means "wheel."
This robot moves like a real Ferris wheel. A motor at its base rotates the entire wheel, while the seats are kept upright by gravity, allowing you to add LEGO passengers to them! A force sensor is used to start and stop the wheel's rotation.
These are 3D Building Instructions for the Rolling Camera mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
Luna 3 comes from the soviet spaceship with the same name, that was the first to take a picture of the far side of the moon.
This robot is made to hold a phone, that can be used as a camera to take a picture of the far side of the moon. The robot is pretty simple, it uses two large EV3 motors to move around and also has a stand for the phone. The stand is made to work with most phones, but you can easily modify it to work with any camera.
This is the attachment of Team "Nightbeast", with which they do:
M11–Escape Velocity and M13–Observatory
The Observatory result depends on the model. Sometimes the pointer is in the orange area otherwise in the white area.
This is a Material supplementing the Instructors training course. Attached is our methodology for working with students. If you spend some time to read it beforehand, we can discuss only the questions that you have, instead of listening to the whole thing. That will be a more efficient usage of our time in the training.
This is the chassis for the popular FTC Push Bot. The robot is built with the Tetrix set and uses two motors. When preparing for a FIRST Technical Challenge competition (FTC) it is very useful to have a chassis from which you could start working. It might not, and will surely not be the final robot, but a good base is always useful.
With this chassis, we've also made a short course of how to control it. Take a look at FIRST Technical Challenge. Basic GamePads, control and attachments for the Tetrix set.
Simple VEX IQ competition base with a lot of space for attachments and gravity center in the backside of the robot.
A very simple base of the robot that could be used for adding attachments.
Soon after a launch, rocket engines often separate away from spacecraft by design, but that’s long before the spacecraft leaves the pull of gravity. So why doesn’t the spacecraft fall back to earth?
The robot needs to impact the strike pad hard enough to keep the spacecraft from dropping back down.
Scoring Requirements
(mission descriptions source https://www.first-lego-league.org/)
These are 3D Building Instructions for the Expert Delivery mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.
These are 3D Building Instructions for the Augmented Reality Statue mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.
This is the robot that we use to demonstrate a solution for the World Robot Olympiad 2021 Junior competition. This is a Post season solution. We never release any solutions during the season as this will have a negative impact on the competition.
We started with this robot and it has a few good ideas. It can collect two cars at the same time. We later decided to go for a more powerful robot. Check out WRO 2021 Junior: Slaimi - a post season WRO competition solution robot
This attachment was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot. It is meant to help the robot complete the 3rd mission of the FLL Cargo Connect competition.
This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Basketball mission and it is the second attachment for this mission. The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.
We've deprecated it because we build a better attachment
This is the attachment to accomplish Fll 2019 M06 mission with the Whakatae. You can see how to attach the attachment to the robot in this tutorial to do.
It also accomplish Fll 2019 M06 mission.
This is the attachment to accomplish Fll 2019 M01 mission with the Whakatae. You can see how to attach the attachment to the robot in this tutorial.
These are instructions on how to build the:
for the FIRST LEGO League 2019-2020 City Shaper Challenge.
You can find more building instructions and tips and tricks about the competition on this page.
