Building Instructions -

• Java

These are building instructions for Overload Centrifuge training machine built with LEGO WeDo 2.0

Not all LEGO Mindstorms EV3 Robot should be aligned horizontally or vertically. It is quite possible to have the brick and the motors attached in such a way that the robot is at a certain angle. 

This is a very useful small construction that could be used as a base and extended with hands and heads or other interesting ....robot body parts.

This robot extends the Tetrix Box Robot chassis for FTC competitions with an additional arm. The arm could be used for lifting and placing objects and could be quite useful. 

There is a special rubber band at the end of the arm, because there are not enough parts in the Tetrix set and we had to use a rubber band. But the principle of the arm is interesting, useful and you should be familiar with it - the arm keeps the motors always in the right orientation.   

Background

For rovers in other worlds, getting stuck is definitely not okay! Teams of rovers can help each other, but a lone rover needs to be very careful.

Mission

The robot or whatever agent-craft it sends out needs to cross the craters model completely, by driving directly over it. Not near it. Not around it.

Scores

• Robot or agent-craft crossed the craters model completely: 20
• Possible scores: 0, 20

Scoring Requirements

• All weight-bearing features of the crossing equipment must cross completely between the towers. > Only allowed method. Must be observed by the referee.
• The crossing must be from east to west, and make it completely past the flattened gate. > Only allowed method. Must be observed by the referee.

(mission descriptions source: https://www.first-lego-league.org/)

The Chain Monster is one of the coolest Box Robots that we've built. But what is a robot without attachments that can accomplish missions? These here are 3D building instructions demonstrating how the frame for the robot could be built. We've discussed frames in the Box Robots courses for EV3. Take a look at this one. See if it can inspire you to build robots and attachments in certain way to achieve consistent and reliable robot behavior.

Containers mission models reworked from a LEGO Mindstorms EV3 version available at 778-containers-mission-models-fllcasts-off-season-challenge-2019 to a LEGO Education SPIKE Prime version available in this material. In 3D building instructions for you to construct them.

Whitiki comes from Maori and means Belt.

The robot uses a medium motor to run the belt and a color sensor to identify the color of the ball coming in. There are 56 chain pieces in the robot.

These are 3D Building Instructions for M03 Coral Nursery mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. This mission model does not have an alternative due to the specificity of the parts.

This attachment have a guider mechanism that align the robot to the attachment. The attachment woks with SUV Box Robot.

The program is at programs/1zfoc7-module-with-aligning-attacher-for-m08-aerobic-exercise-program

Building instructions for a LEGO Mindstorms EV3 Ambulance Robot Attachment for the FIRST LEGO League 2013 Nature's Fury robotics competition.    The attachment grabs the ambulance car and slightly lifts it. The rubber bands help with triggering the attachment at the right time

Building instructions for the Pinless Rubber Band Attachment:

This robot is made to serve the best tea in the whole continent! It is based on the Easy Bot from EV3. As its predecessor it is based on LEGO Mindstorms EV3. It uses two large motors to move around. The best part of the robot is the cup holder, that has a cool cup that shows the KISS principle.

This is a gun which is build from EV3 Lego Mindstorms set. It can load small EV3 Beams and shoot them.

Building instructions for a LEGO Mindstorms EV3 Multi-axles mechanism

Attachment part of a series of robot attachments for accomplishing the FIRST LEGO League 2013 competition. This specific construction lifts the two vehicles. It uses rubber bands for locking the levers. Take a look at the video tutorials for details explanation on how it works.

Build from LEGO Mindstorms EV3 parts.

One LEGO gear is powering two LEGO Gears and at the end, from one motor we rotate two axles in opposite directions. Follow the building instructions.

This is the first type of an active geared attachment. "Active" means that is is power by a motor. "Geared" means that it use gears. "Reusable" means that you can easily extend the attachment with additional parts - eg - you can reuse it. It shows a basic principle of how power is transferred between different axles that have different orientation in space- like when one of the axles is horizontal and the other is vertical. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad and others. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

This attachment is accomplishing three missions from the FIRST LEGO League 2022-2023. It is for the Chain Monster robot

"Do. Or do not. There is no try!"

You probably remember this famous line spoken by Yoda in the film "Star Wars Episode V: The Empire Strikes Back". We've created FREE 3D and animated building instructions of LEGO's Star Wars "The Child (75318)" build-and-display model. Except the obvious cuteness overload, we did our best to create the 3D steps in the easiest way possible, so you DO manage to build "Baby Yoda" successfully, because trying is not an option. Fun you shall have, in 3D you shall build! Ready to go?

To embed this instruction on your website visit it at (buildin3d.com)