Building Instructions

Robot building instructions for a World robotics Olympiad with a large container used for collecting ping-pong balls

Building instructions for the One Attachment. Built from LEGO Mindstorms EV3 parts and with an Ultrasonic sensor we've used this attachment to accomplish most of the missions at FIRST LEGO League 2013.

SIngle robot attachment, many points. 

Another example for a quick pinless attachment build with LEGO Mindstorms EV3 robots.

This is a robot, designed to easily lift a cup, while still holding it upright. The robot uses one motor attached to the brick to lift the cup to any angle you want. The cup we have added is purely cosmetic, but with a few adjustments, you can make it lift real cups. Be careful around liquids though!

Do you have a friend for a sleepover? This might be the perfect robot for you! It is a football gate, guarded by Fint, the goalkeeper robot. You can control him, by using the remote controller, that consists of two Touch Sensors. Take turns making penalty shots and have a blast with this awesome robot!

What we recommend:

• Using a big LEGO wheel from your set as a football ball.
• If you throw the wheel too fast for the robot to catch, increase the distance between the place you shoot the ball from and the robot.

It kind of looks like an Inuit. But it surely walks like one. Most of the time Inuit walk with special boots that allows them to walk on deep snow without getting stuck. This robot walks in the same way. It has large feet and it moves one after the other. 

Instructions for building remote control. It uses the rotation sensor to determine the steering and touch sensor for handling the movement. Find building instructions for a suitable chassis here. 

Together the controller and the car look like this:

This is the attachment of Team "Nightbeast", with which they solve M01 and M02 from FLL Into Orbit Challenge

Building instructions for the most simple grabber using just one Large EV3 LEGO motor. It has one static lever and one active lever.

This module is made as a grabber that uses a cool mechanism to catch things vertically. It is powered by a medium motor. The grabber is used in Earl Bot - Grabbing and Clearing LEGO Mindstorms Robot without wheels.

Building instructions for the LEGO Mindstorms attachment using Rubber Bands

We've separated the BigDaddy robot into a few smaller modules. This teaches modularity and gives you the option to reuse some of the modules and to look at specific modules.

Mintonette comes from the first iteration of Volleyball with the same name.

The robot uses two EV3 Touch sensors to control the turret left and right. It uses the EV3 Color sensor to trigger the shooting mechanism, which consists of an EV3 Large motor which pulls a lever to shoot a ball.

The first of a series of attachments that we add to a World Robotics Olympiad LEGO Mindstorms Robot. The attachment is an example for collecting ping-balls. The robot and the attachment are in the same construction. The attachment is a base for a container that could be extended.

This is a module containing two sets of three legs to make the ideal hexapod insect! The two sets are each powered by a large EV3 motor which are connected in various ways to the three legs to move them like a real bug! You can combine this module with others to build a bug robot.

This is a ping-ball containing attachment for a World Robotics Olympiad. The attachment is building with LEGO Mindstorms EV3 parts. It is tiltel so that it is easier for the balls to fall off at certain points, which was part of the missions at the 2015 cmpetition. 

This is a module that is made to look like a polar bear head, but really it could be used for many animals. It uses a medium motor to bite and an ultrasonic sensor for eyes. We have labeled it a polar bear head, because it is used in Polar Bear - LEGO Mindstorms EV3 Robot that looks like a polar bear.

This is the attachment of Team "Nightbeast", with which they :
1. Eject the 2x4 Brick by placing a Regolith Core Sample into the 3D Printer.
2. Crater Crossing
3. Tries to score a meteoroid( tries to shoot a ball)
From missions M03,M04 and M014 from FLL Into Orbit Challange

A chassis built with LEGO Mindstorms EV3 parts designed for World Robotics Olympiad

This frame holds the motor and ev3 brick used in the catapult. The frame is placed on top of the rotating base and thus could be easily rotated. The brick could be both NXT and EV3