This module is made to look and move like a real ship's sails! The module consists of two masts that are connected so that they move together. The back mast is connected to a medium motor that can move all sails and is also connected to a gyro sensor, that can detect if the whole ship is rotated. This module is used in Yolanda - LEGO Mindstorms EV3 Sailship robot.
This is an attachment for extracting the raw materials. This attachment is made for Kamak box robot.
The program for this attachment is FLL 2018: Attachment To Accomplish The Into Orbit Extraction (05) Robot Game With Kamak - Box Robot - Demo Program
We want students to be able to easily find the parts and to put the parts back in the designated compartments.
Files are printed on both sides of 160-gram sheet of paper A3 format.
The sorting sheet is designed to fit in the cover of the box. To gather in the lid, the excess parts of the printed sheet must be cut off the markers on the front of the sheet.
To extend the life of the sheets, you can laminate them either with a "laminate matte" or a simple laminate. The disadvantage of the simple laminate is that there is a lot of gloss. The disadvantage of laminate matte is that it has to be sealed with a clear PVA C-200 adhesive to prevent it from opening over time.
We recommend printing doublesided and turning over the "short edge", like a book. If you decide, you may flip the printed result over the long side. Both options are available at you local print center.
This is the attachment of Team "Nightbeast", with which they :
1. M10–Food Production
2. M12–Satellite Orbits
3. Move the Cone Module to base
From Missions M06, M10 and M12 from FLL Into Orbit Challenge
The run with this attachment is very inconsistent and fails very often.
Remilo comes from esperanto and means paddle.
The robot resembles a boat, but moves on land. It uses two large motors with "paddles" attached to them to move. Because its movement capabilities are limited, it has a gyro sensor to correctly move forward.
Building instructions for the speed bump mission model. The models is used in the Speed bump mission of FLLCasts Off-season Challenge 2019.
Building instructions for the dispenser mission model. The models is used in the Logistics mission of FLLCasts Off-season Challenge 2019.
This is one of the spacers that the Nightbeast team used in FLL 2018/19 Into Orbit Challange
A robot that was used in the WRO Elementary 2018 Robot competition. It is a nice idea of how the motors could control different levers to push things around
You can position the motors on the construction in a number of different ways. We are exploring the advantages and disadvantages of each of them. These are building instructions for the first way to position the LEGO Mindstorms EV3 motors.
Third part of the LEGO Mindstorms BidDaddy Competition Robot.
During a competition a team of students had to build a robot that looks like a musician. This construction in front of the robot is a Trompet and it looks like Ane is playing some music. If you play music on the phone on the side it is really funny to watch it play.
Building instructions for the construction plates mission models. The models are used in the Road construction mission of FLLCasts Off-season Challenge with LEGO Mindstorms EV3.
In Robopartans classes we needed a few parts the the robot could lift in a competition. These is a box that is suitable for this
Are you a football fan? Here are the building instructions you'll need for the construction of the Football Goal, if you decide to play it with a Mindstorms 51515 Robot Inventor set. You'll also need to build the smallest robot Tricky with its Kick the ball attachment. The Mindstorms/Duplo ball is included in the set.
You can find the LEGO set, with which this was built, by following this link.
You can find constructions created to play with Tricky, by following the links below:
