Building Instructions -

• LEGO MINDSTORMS EV3

Not all LEGO Mindstorms EV3 Robot should be aligned horizontally or vertically. It is quite possible to have the brick and the motors attached in such a way that the robot is at a certain angle. 

This is a very useful small construction that could be used as a base and extended with hands and heads or other interesting ....robot body parts.

This LEGO Mindstorms Attachment has three gears, one frame and two axles. The goal of the attachment is to use the gears to change the direction in which the motion is transferred.  

Building instructions for the Pinless Rubber Band Attachment:

This attachment have a guider mechanism that align the robot to the attachment. The attachment woks with SUV Box Robot.

The program is at programs/1zfoc7-module-with-aligning-attacher-for-m08-aerobic-exercise-program

Whitiki comes from Maori and means Belt.

The robot uses a medium motor to run the belt and a color sensor to identify the color of the ball coming in. There are 56 chain pieces in the robot.

Building instructions for a LEGO Mindstorms EV3 Ambulance Robot Attachment for the FIRST LEGO League 2013 Nature's Fury robotics competition.    The attachment grabs the ambulance car and slightly lifts it. The rubber bands help with triggering the attachment at the right time

Attachment part of a series of robot attachments for accomplishing the FIRST LEGO League 2013 competition. This specific construction lifts the two vehicles. It uses rubber bands for locking the levers. Take a look at the video tutorials for details explanation on how it works.

Build from LEGO Mindstorms EV3 parts.

This robot is made to serve the best tea in the whole continent! It is based on the Easy Bot from EV3. As its predecessor it is based on LEGO Mindstorms EV3. It uses two large motors to move around. The best part of the robot is the cup holder, that has a cool cup that shows the KISS principle.

Building instructions for a LEGO Mindstorms EV3 Multi-axles mechanism

One LEGO gear is powering two LEGO Gears and at the end, from one motor we rotate two axles in opposite directions. Follow the building instructions.

Alice is a lovely little bird, with some amazing mechanisms on her feet. It uses two large motors and one medium one as a head, which drives both its wings.

Building instruction for both EV3 and NXT. The whole catapult is build in exactly 78 steps.

This device is designed to be attached to "LEGO Mindstorms Robot with a large inertia cargo". It is a color sensor that goes on the caster wheel of the robot. In this case, the sensor will follow the robot.

Building instructions for a LEGO Mindstorms EV3 robot where the motors are at the back of the horizontally placed brick and they are placed vertically. This construction is difficult to turn with but at the same time is quite high and could be used as a base for different trucks or animals. 

A similar LEGO attachment the previous once, but this one is with a different gear ratio. Again using a frame, two axles and two gears you can change the direction of the motion.  

This construction is taken from here. It is a little bit modified so you can build it from one EV3 Set. We made it because we thing it is genius. We are "angry" in the good meaning оf the word, because we didn't invent it. We hope that you will have the same fun as we do with it.

We think that this thing is a perfect example of balancing and mind scratching behavior. You also need to be precise with the length of the ropes. And the best part of it is that you don't need to program anything. 

Have fun and good luck!

These are instructions prepared by LEGO.