Building Instructions -

• LEGO Education SPIKE Prime

This is a pinless attachment built with LEGO Education SPIKE Prime parts and it demonstrates how to use pinless attachments. The goal of the attachment is to quickly place it on the robot without any pins. The attachment is used for pushing. Check out the courses below for more information how to use the attachment. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions

Big Wheelster, as the name suggests, is a robot with a big wheel! The large wheel is built using SPIKE Prime baseplates. The robot also features an interesting steering mechanism. At the front, we’ve added a touch sensor to detect obstacles—and hopefully avoid them!

This is an attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. On a robot most of the time you place attachments on the front/side/top. These instructions show how to build an attachment that could be placed on the front of the robot. The idea is to demonstrate the principle and you can expand and build a more specific attachment for the mission that you are accomplishing. Check the courses in which this attachment is used for more information and tutorials on how to use it.

This is an pinless robot attachment designed for taking loops. It's built with LEGO Education SPIKE Prime parts and it demonstrates how to collect a loop while moving with the robot. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. There are other attachment that are designed for taking a loop and locking it so that it does not fall, but they are more complex. Search for 'Carabiner' at FLLCasts.com

This is a carabiner attachment for taking loops. It is built with LEGO Education SPIKE Prime parts and it demonstrates how to successfully take loops. The goal of the attachment is to lock the loop after it catches it. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions

This is the forth type of an active geared attachment. "Active" means that is is power by a motor. "Geared" means that it uses gears. "Reusable" means that you can easily extend the attachment with additional parts - eg - you can reuse it. It shows a basic principle of how power is transferred between different axles that have different orientation in space - like when one of the axles is horizontal and the other is vertical. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad and others. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

This is an attachment that could be easily detached after a mission is accomplished. It's built with LEGO Education SPIKE Prime parts and it demonstrates an important principle for building attachments for robotics competitions like FIRST LEGO League/World Robotics Olympiad and others. You move with the robot, you complete the mission and you leave the attachment on the field when the mission is completed. In this way you save time when adding the attachment as it is most of the time pinless and takes a fraction of a second to put it. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

This robot attachment in inspired by one of the most interesting missions we've seen at FIRST LEGO League competitions - the Manhole Cover (08th) Mission in FIRST LEGO League 2017-2018 . The attachment demonstrates how you could flip an object. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

A hand-driven Ferris wheel for a cascade scene—something like the famous Ferris wheel moment from the movie Le Boulet.

Or imagine a story where... a chicken fights two hunters and sets off an explosion so powerful that the shockwave launches the chicken to the top of the highest cabin, while the hunters are blown so far away they don't even appear in the thumbnail! Or... well, yeah, I remember a story...

Just open your mind to the strangest and most unusual story you can imagine.

Estimated weekly playtime with a good story: ~2–3 hours.

The Swing Game is a SPIKE Prime robot designed as a two-player game. The goal is for both LEGO figures to reach the center of the swing without tipping it over to either side. Each LEGO figure is mounted on a motor connected to a Technic gear rack, allowing it to move along the swing. The motors are controlled separately—one by a color sensor and the other by a Large Motor. If one player moves too far ahead without the other keeping up, the swing will tip... and it’s game over! Good luck, and have fun!

Containers mission models reworked from a LEGO Mindstorms EV3 version available at 778-containers-mission-models-fllcasts-off-season-challenge-2019 to a LEGO Education SPIKE Prime version available in this material. In 3D building instructions for you to construct them.

Pallo, from Ancient Greek, means "to throw" or "to hurl"—a root of the modern word "catapult".

Pallo is a robot made of two parts. The first part is the catapult! It contains no electronic components and uses two rubber bands to launch a projectile toward the second part. The second part is the target. It features a color sensor which, using a piston with differently colored sections, detects how accurately the target has been hit. Good luck with the shooting!

This is the first type of an active geared attachment. "Active" means that is is power by a motor. "Geared" means that it use gears. "Reusable" means that you can easily extend the attachment with additional parts - eg - you can reuse it. It shows a basic principle of how power is transferred between different axles that have different orientation in space- like when one of the axles is horizontal and the other is vertical. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad and others. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

The Chain Monster is one of the coolest Box Robots that we've built. But what is a robot without attachments that can accomplish missions? These here are 3D building instructions demonstrating how the frame for the robot could be built. We've discussed frames in the Box Robots courses for EV3. Take a look at this one. See if it can inspire you to build robots and attachments in certain way to achieve consistent and reliable robot behavior.

With this attachment we complete the Elevator and Steel construction for the FIRST LEGO League 2019-2020 competition. The attachment is placed on the Whakatae - LEGO Education SPIKE Prime Competition Box robot

With this LEGO Education SPIKE Prime attachment we accomplish the basketball mission from the FIRST LEGO League 2020 RePlay competition. The goal of the mission is to put the ball into the basket and to have the basket up at the end of the round. This is a complex attachment. It uses gear wheels and warm gears to transfer the power from the motor to the top of the attachment. At the top of the attachment there is a wheel with a rope. The rope is build with LEGO Education SPIKE Prime parts. If you have the chance, use a different LEGO rope, but if you don't that this one will be ok.

This attachment is accomplishing three missions from the FIRST LEGO League 2022-2023. It is for the Chain Monster robot

This is an attachment for the Kriket box robot. It demonstrates how to build attachments that glide over the robot, are pinless and could be quickly and easily replaced and changed with another attachment. This attachment also lifts. Quite cool. Quite cool.

This is the Prime Power Switch mission as we've designed it for FLLCasts Off-season Challenge. It it a useful mission to accomplish with different attachments and approaches. The mission is to rotate the lever of the mission model.

The LEGO Mindstorms EV3 version of this mission model is available at Power Switch mission model. FLLCasts Off-season Challenge

This attachment is part of a second version of attachments for accomplishing the M07, M08 and M15 where we have to push and collect in the FIRST LEGO League 2022-2023 competition. It is for the Kriket Box Robot and we are doing this second version to make sure there are enough examples of how to use the Kriket box robot.

The interesting part about this attachment is how it connects to the robot. The Kriket has two brown axles that are connected to the motors via a gear mechanism. The attachment is attached to these brown axles which transfer the motor movement to the attachment.