Building Instructions -

• LEGO Education SPIKE Prime

These loops can be used to practice different methods of collecting them. This is a very common challenge in FLL.

We use this positioning attachment with the Kriket box robot and it's run of five missions in a row

This is an alternative model for the FIRST LEGO League 2022-2023 SUPERPOWERED built only with LEGO Education SPIKE Prime parts. The goal of the model is to be able to experiment and learn without the need to have the real parts, that at this moment are almost impossible to find and gather.

This is a passive attachment activated by the robot and not by a motor. It's used for accomplishing the FIRST LEGO League 2021-2022 Cargo Connect Home Delivery mission model.

This is a passive attachment used for FIRST LEGO League 2021-2022 Cargo Connect mission called Large Delivery. The attachment has a locking mechanism to lock the large wing to allow us to safely carry it.

Uydu, from Turkish, means satellite.

Instructions for a LEGO SPIKE Prime robot, that has an inbuilt holder for your phone! The robot also moves with 2 medium motors.

This robot attachment is placed at the front of a LEGO Education SPIKE Prime competition robot to facilitate and accomplish the FIRST LEGO League 2020 RePlay Step Counter mission. We can use the attachment or we can skip it.

This is the Coffee Pot, along with a coffee mug. It was 2 hours of fun

This robot is named after the South Pole–Aitken Basin, the largest impact crater in the Solar System, located on the far side of the Moon.

Astronauts, get ready to enter lunar orbit! This robot is equipped with a holder for a camera or phone, allowing it to take a picture of the far side of the Moon. If your device does not fit, you can easily adjust the holder to suit your needs.

With its two motors, Aitken can move in both wide and narrow circles around the Moon to capture the perfect photo.

This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot. It solves M10 Sound Mixer using a passive attachment and collects Noah, the sound engineer using an inertial attachment.

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment is designed to detach, once it completes its purpose. Due to the way, the attachment is left on the mission model, it slides from, creating distance between itself and the mission model, therefore meeting the requirement that no attachment should be touching the mission model at the end of the competition. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.

This is an alternative mission model for FIRST LEGO League 2022-2023 SUPERPOWERED Hybrid Car mission model. It is alternative as you only need LEGO Education SPIKE Prime parts to build it and you don't need the real parts from the real competition

This is an alternative model for the FIRST LEGO League 2022-2023 SUPERPOWERED build only with LEGO Education SPIKE Prime parts. The goal of the model is to be able to experiment and learn without the need to have the real parts, that at this moment are almost impossible to find and gather.

Alternative to Bag 13 - Truck Airplane and Activators Alternative Model - FIRST LEGO LEAGUE 2021 - 2022 CARGO CONNECT

This attachment was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot. It is meant to help the robot complete the 13th mission of the FLL Cargo Connect competition.

This is a pinless attachment for a LEGO Education SPIKE Prime robot that uses the Ultrasonic sensor. The attachment could be placed on top of the robot. As it is pinless, it is easy to quickly place and remove it.

In Dutch, "muur" means "wall."

This robot is designed to have a wall in front of it to clear obstacles.

The instructions below provide an example of a wall that students can use in front of their robot if they are having difficulty creating one.

This attachment for the Nautiq robot is designed to align the robot accurately during the FIRST LEGO League 2024‑2025 SUBMERGED competition. It improves positioning consistency, helping ensure precise and repeatable mission runs.