Building Instructions -

• Car

Let's go fast. Large wheels on the back. A lot of torque, small wheels on the front, good aerodynamics. Here we go.

These are building instructions for a LEGO Mindstorms EV3 Drag Car. 

Building instructions for a LEGO EV3 steering car. We use two large motors, so that the rear wheels will be driven independently by a separate motor. For your convinience, you can use the EV3-G MyBlock for moving the Boomer.

Building instructions for a LEGO Truck. The robot is presented as an Ammo Truck but it can be used for transporting various other objects, too. The construction has a rear drive with each of the rear wheels driven by a Large Lego Motor. The front wheels steer using a Medium Lego Motor. The Brick is placed at the front of the construction which gives the opportunity to easily attach different sensors, based on the task. 

Building instructions for a steering car. The front wheels steer through a Medium LEGO EV3 motor while the rear wheels are both driven by a single Large LEGO EV3 motor.

Francesco 2 is inspired by the robot Francesco.

Building instructions for a simple car using an EV3 Large motor for turning the front wheels and EV3 medium motor with differential for driving the rear wheels. Differently, from Francesco, Francesco 2 has space where a locking mechanism is meant to be built for the differential.

Instructions for building a LEGO truck. We use a medium motor for steering and a large motor for driving one of the rear wheels.

Instructions for building a LEGO truck. We use a medium motor for steering and a large motor for driving one of the rear wheels.

Building instructions for a simple car using an EV3 Large motor for turning the front wheels and EV3 medium motor with differential for driving the rear wheels.

Instructions for building a steering chassis from LEGO EV3 Mindstorms. It uses EV3 Large motor to power the rear wheels and EV3 Medium motor for the steering mechanism. Find building instructions for the remote control here.

VEX IQ Steering Rover Car with remote control.

This robot looks a bit weird. Can you guess why? The motors are placed in opposite directions. One of the motors is facing "forward" while the other one is facing "backward." This means that if you tell both motors to rotate forward, the robot will just spin! To make the robot move forward, you will need to make one motor rotate forward and the other backward.

The goal of this robot is to teach students that motors can be placed in various ways. It is not always the case that both motors face the same direction, and this needs to be accounted for during programming.