These are all the robot building instructions. By visiting each building instruction you could see the Tutorials and Courses and Lessons in which it is used.
In the LEGO Mindstorms Robot Inventor set there is only one color sensor. The original Gazon is build from LEGO Education SPIKE Prime where there are two light sensors. The idea behind this robot is to be able to build it from Robot Inventor and to use it during FIRST LEGO League competitions
After the success of the original Gazon robot from LEGO Education SPIKE Prime, we've decided the build a similar robot, but from LEGO Mindstorms Robot Inventor 51515. Teams are participating in the FIRST LEGO League competition with a LEGO Mindstorms Robot Inventor set and we know it will be helpful. But this robot can not be build from a LEGO Mindstorms Robot Inventor 51515 as the set has only one Color sensor. We've build a version of the Gazon robot to address this specific limitation.
This 3D building instruction is about a FIRST LEGO League 2020 mission called the Slide mission. To accomplish the mission the LEGO Robot must take two LEGO minifigures from a slide and bring them back to base. The whole attachment is built only with parts from LEGO Mindstrorms Robot Inventor Set.
This is a complex three parts attachment for the FIRST LEGO League 2020 Replay competition mission called Boccia. The attachment does three things in the same time. It can align to a mission model, It has a contained for boxes that should be dropped and it also has a lever to rotate the boccia target mission model. On top of the that the attachment is working 10 out of 10
This is a flip attachment. Arguably the flip missions are some of the most interesting on FLL competitions. The purpose of this attachment is to accomplish the FIRST LEGO League 2020 Cell Phone Mission. It contains two four gear wheels. It is an active attachment. It changes the direction with gear wheels. There is a lot one could learn from such an attachment. It is also build only from parts in the LEGO Mindstorms Robot Inventor Set.
With this LEGO robot attachment from LEGO Mindstorms Robot Inventor we accomplish the Rowing Machine from FIRST LEGO League 2020. The attachment works like a hook that catches the wheel of the Rowing Machine mission model and pulls on it. There are gear wheels that transfer the power from the robot motors to the hook at the end. This attachment shows the principle of catching things
This is part one of an FLL 2020 attachment used to accomplish the pull-up bar mission. This is the part of the attachment that stays below the robot. We put the whole robot on this attachment and we move. It is an interesting approach because as we move to the pull up bar this attachment detaches itself from the robot.
The Bench mission in FIRST LEGO League 2020 was one of the more complex missions during the competition. It involved two things - lifting part of the mission model and bringing it back to base and in the same time dropping 4 different boxes which was difficult to achieve. We came up with two solutions for SPIKE Prime and for Robot Inventor and this is the Robot Inventor solution. Take a look. You will learn how to build complex attachments doing more than one thing at a time.
This is a robot attachment built only with parts from LEGO Mindstorms Robot Inventor Set. The goal of the attachment is to accomplish the FIRST LEGO League 2020 RePlay mission call Treadmill. The attachment has two gear wheels that could transfer the power from the motors to the wheel. The wheel is the one that is accomplishing the mission as it rotates and rotates. The attachment is pinless.
The second part of the attachment is used to connect the robot with the pull-up bar. This attachment demonstrates a locking mechanism and can hold the weight of the whole robot while the robot is on the pull-up bar.
This is a FIRST LEGO League robot attachment for the Step Counter mission from the 2020 RePlay competition. It is a pinless attachment that is optional and could be used on the robot or we can accomplish the mission without the attachment. It is better to use the attachment as this will give us a more smooth and accurate movement of the robot.
The purpose of this attachment is to flip the tires in the FIRST LEGO League 2020 Replay competition. There are two tires on the field. The attachment must flip them and return them to their initial position. This is an extremely interesting attachment that is using friction and force in order to flip the tires.