Building Instructions -

• FIRST LEGO League

-

• EV3-G

Modification of the EV3 Competition Robot Full with light sensors attached to the front

Luly is a new STEAM competition robot from LEGO Education SPIKE Prime. We would use in some of the courses. This version of Luly have some light shields to protect the color sensor from ambient light. Check out the courses below and see how Luly is used to complete in a competition.

This is an example of a robot for Sumo Robotics competitions. Specifically for RoboteX challenge. As most of the Sumo competitions have specific requirements for the robot size this one follows the 15cm x 15cm requirements.

Sumo competitions could be quite fun and interesting as the goal is to push the other robot outside of the ring. 

Building instructions for a LEGO Mindstorms EV3 Robot Base with 56mm Tires, Version1. The robot base could be used in robotics competitions as FIRST LEGO League, World Robotics Olympiad and others

This attachment is designed for the Smaller Pancake - SPIKE Prime Box Robot and completes Mission 14: Forum and Mission 15: Site Marking in the FIRST LEGO League 2025-2026 UNEARTHED competition. It delivers all the artifacts to the Forum and places the flag in its designated position nearby.

This attachment is designed for the Smaller Pancake - SPIKE Prime Box Robot and completes Mission 10: Tip the Scales in the FIRST LEGO League 2025-2026 UNEARTHED competition. It releases the large scale, latches onto the Scale Pan, and transports it safely back to base.

This attachment is designed for the Smaller Pancake - SPIKE Prime Box Robot and completes Mission 02: Map Reveal and Mission 03: Mineshaft Explorer in the FIRST LEGO League 2025-2026 UNEARTHED competition. It pushes two of the topsoil sections aside and lifts the third to extract it. The robot then moves backward and raises the rail, allowing the minecart to travel onto the other team’s field.

This robot was built by your request. It includes NXT large wheels. The Large LEGOO Mindstorms wheels will give you a faster robot, but be careful, because it will not be that accurate. 

We had a couple of minutes before starting another robot and we just came up with this robot. If you would like to build a Box Robot, but don't have enough parts this is a good construction that you could learn from. It has a frame. It has three motors. You can add attachments at the top. 

This LEGO Mindstorms EV3 robot chassis has the brick positioned vertically. Interesting idea that could be very useful.

Attachment used to transfer the motion from the motor from a vertical axle to a horizontal axle. Uses two gear wheels. Could be built with LEGO Mindstorms EV3 and LEGO Mindstorms NXT kits.   

The goal of this robot attachment is to demonstrate a principle and example for lifting heavy objects vertically. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

This robot attachment shows you how to limit the rotation of a lever. It uses two gear wheels to transfer the motion on 90 degrees. 

It could be built with LEGO Mindstorms EV3 and NXT versions. Most of the time during competitions like FIRST LEGO League and World Robotics Olympiad you need a lever for just a limited motion

A LEGO Mindstorms EV3 Chassis with wheels at the front. Built with the EV3 set you can use this robot chassis as a base for extending with attachments. 

This is a robot attachment that could be used to lift object. The gear ratio of this attachment is allows it to lift Heavy objects. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. The goal of the attachment is to demonstrate the principle and example of an attachment for heavy lifting that could be placed on the robot. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

No need for all attachments to be powered by motors and to include gears. It's sometimes possible to use a simple robot attachment to collect objects. Such attachments we call passive and this one is an example for the Box Robot Chassis.

Build with LEGO Mindstorms EV3 

Light Cooley is an extension of Cooley. We've added two Light/Color sensors to allow for lines to be followed and for the robot to alight to them and we've kept everything Cooley was cool and known about. Build a few attachments for it and take it on a ride for a FIRST LEGO League competition

Do you remember the Chain Monster Box Robot? This one is the same but without the chains. What is cool about this robot is you can use almost all Chain Monster attachments and build a lot more.

The Unchained Monster box robot requires additional parts on top of the LEGO Education SPIKE Prime and LEGO Education SPIKE Essentials. Check out the additional parts required.

Building instructions for this LEGO Mindstorms EV3 robot base that could be used in FIRST LEGO League, World Robotics Olympiad and other robotics competitions

With Robotistka we can almost use the full potential of the LEGO Education SPIKE Prime robot to prepare for robotics competitions like FIRST LEGO League. It is small, it is a Box Robot, it has two motors at the front and two color sensor for the line.