Building Instructions -

• FIRST LEGO League

Modification of the EV3 Competition Robot Full with light sensors attached to the front

This attachment for the Nautiq robot is designed to collect the Trident Parts for M14, deliver the Shark for M02, and collect one Krill for M12 in the FIRST LEGO League 2024‑2025 SUBMERGED competition. It features a passive trigger for the krill collection and aligns the robot with the mission model before collecting the trident parts.

This set of two attachments for the Nautiq robot is designed to solve multiple missions from the FIRST LEGO League 2024‑2025 SUBMERGED competition. It completes M05 Angler Fish, collects 4 Krills for M12 Feed the Whale, gathers all Reef Segments for M03 Coral Reef, and collects all Samples for M14 Sample Collection. The two-attachment design allows for efficient execution of multiple tasks in a single run.

This set of two attachments for the Nautiq robot is designed to collect and deliver the scuba diver for M01 Coral Nursery and M04 Scuba Diver, collect the shark for M02 Shark, and flip the coral reef for M03 Coral Reef in the FIRST LEGO League 2024‑2025 SUBMERGED competition. One attachment is mounted from above, and the other from below, allowing efficient execution of multiple missions in a single run.

This attachment for the Nautiq robot is designed to lift the coral for M01 Coral Nursery from the FIRST LEGO League 2024‑2025 SUBMERGED competition. It performs two actions simultaneously: lifting the mission model loop and opening the door that holds the Reef Segments.

This attachment for the Nautiq robot is designed to accomplish M12 Feed the Whale in the FIRST LEGO League 2024‑2025 SUBMERGED competition. It demonstrates how to use mission models as part of a passive mechanical trigger and how to apply carabiner mechanisms for purposes other than locking.

This is an example of a robot for Sumo Robotics competitions. Specifically for RoboteX challenge. As most of the Sumo competitions have specific requirements for the robot size this one follows the 15cm x 15cm requirements.

Sumo competitions could be quite fun and interesting as the goal is to push the other robot outside of the ring. 

The Rollie robot is a compact, box-shaped robot built entirely using LEGO Spike Prime components. It incorporates six Technic Gear 28-Tooth Double Bevel gears, even though the standard Spike Prime set includes only five. If you don't have a spare gear, you can substitute the two front gears with a Technic Connector Circular with 2 Pin Holes and 3 Axle Holes, or any other compatible gear available in the set. Rollie is engineered with a minimalist design approach, using a limited number of parts from both the base set and the expansion pack, making it efficient and easy to rebuild.

These are Alternative 3D Building Instructions for the Light Show mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition. A single accurate rotation of the white arrow indicates a perfect mission completion.

Building instructions for a LEGO Mindstorms EV3 Robot Base with 56mm Tires, Version1. The robot base could be used in robotics competitions as FIRST LEGO League, World Robotics Olympiad and others

Luly is a new STEAM competition robot from LEGO Education SPIKE Prime. We would use in some of the courses. This version of Luly have some light shields to protect the color sensor from ambient light. Check out the courses below and see how Luly is used to complete in a competition.

These are 3D Building Instructions for an Alternative Theater Scene Change mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

These are 3D Building Instructions for an Alternative Craft Creator mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

This robot was built by your request. It includes NXT large wheels. The Large LEGOO Mindstorms wheels will give you a faster robot, but be careful, because it will not be that accurate. 

We had a couple of minutes before starting another robot and we just came up with this robot. If you would like to build a Box Robot, but don't have enough parts this is a good construction that you could learn from. It has a frame. It has three motors. You can add attachments at the top. 

This LEGO Mindstorms EV3 robot chassis has the brick positioned vertically. Interesting idea that could be very useful.

Attachment used to transfer the motion from the motor from a vertical axle to a horizontal axle. Uses two gear wheels. Could be built with LEGO Mindstorms EV3 and LEGO Mindstorms NXT kits.   

This robot attachment shows you how to limit the rotation of a lever. It uses two gear wheels to transfer the motion on 90 degrees. 

It could be built with LEGO Mindstorms EV3 and NXT versions. Most of the time during competitions like FIRST LEGO League and World Robotics Olympiad you need a lever for just a limited motion

The goal of this robot attachment is to demonstrate a principle and example for lifting heavy objects vertically. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

A LEGO Mindstorms EV3 Chassis with wheels at the front. Built with the EV3 set you can use this robot chassis as a base for extending with attachments.