This attachment is designed for the Smaller Pancake - SPIKE Prime Box Robot and completes Mission 08: Silo in the FIRST LEGO League 2025-2026 UNEARTHED competition. It aligns the robot with the Silo mission model and repeatedly strikes the lever with weighted elements, releasing the Preserved Pieces from the silo.
Active robot attachment for the LEGO Mindstorms EV3 Box robot chassis. The attachment is placed on the top of the robot and uses a system of two gear wheels to transfer the motion to a lever and to .... lift things.
This attachment is designed for the Smaller Pancake - SPIKE Prime Box Robot and completes Mission 02: Map Reveal and Mission 03: Mineshaft Explorer in the FIRST LEGO League 2025-2026 UNEARTHED competition. It pushes two of the topsoil sections aside and lifts the third to extract it. The robot then moves backward and raises the rail, allowing the minecart to travel onto the other team’s field.
This attachment is designed for the Smaller Pancake - SPIKE Prime Box Robot and completes Mission 04: Careful Recovery in the FIRST LEGO League 2025-2026 UNEARTHED competition. It carefully enters the mine, collects the Precious Artifact, and removes it without disturbing the surrounding supports.
The story goes like this. Two engineers meet at a bar (or on discord during the pandemic) discussing which robot to use for this year's FIRST LEGO League 2020 Replay Solution and Review with explanations. They started their cameras, had a hot Carolina Reaper, had an argument, hugged each other, and decided to build Gazon, and use this new robot for the competition. So here it is. Small, 4 motors, 2 color sensors, stable, light.
When you need a LEGO robot attachment to lift heavy things on the competition field. Probably at FIRST LEGO League or World Robotics Olympiad. This attachment uses 4-5 gear wheels to lift a heavy object.
Build with LEGO Mindstorms EV3 parts.
This attachment is designed for the Smaller Pancake - SPIKE Prime Box Robot and is used to complete Mission 05: Who Lived Here?, Mission 06: Forge, and Mission 07: Heavy Lifting in the FIRST LEGO League 2025-2026 UNEARTHED competition. The attachment positions the robot accurately in front of the mission models and interacts with each mechanism in sequence. In one run, it presses the Forge lever to release the stones, activates the Who Lived Here? model, and pushes a stone into the Right base. In a separate run, it pushes or captures the Millstone and transports it to the Right base.
Robot attachment that shows you how a circular motion could be transferred to linear by using a gear and a rack. The final motion is for pushing and pulling things.
The attachment could be built from LEGO Mindstorms EV3 and NXT parts.
This attachment is designed for the Smaller Pancake - SPIKE Prime Box Robot and completes Mission 01: Surface Brushing in the FIRST LEGO League 2025-2026 UNEARTHED competition. It pushes and pulls the Soil Deposit to release and extract the Brush.
This attachment is designed for the Smaller Pancake - SPIKE Prime Box Robot and completes Mission 13: Statue Rebuild in the FIRST LEGO League 2025-2026 UNEARTHED competition. A starting alignment guide helps position the robot accurately in base before the run. The robot then approaches the mission model, aligns in front of it, and lifts the statue into place.
This attachment is designed for the Smaller Pancake - SPIKE Prime Box Robot and completes Mission 09: What’s on Sale? in the FIRST LEGO League 2025-2026 UNEARTHED competition. It pulls the horizontal axle to raise the roof, then presses the lever to lift the wares.
This robot is very low, relatively compact and very hard to control. To move as desired it must carry heavy attachment between its front tires. It also needs often clearing of its rear balls and the beads where they are positioned. Ones that is done the robot becomes pretty accurate. If you change the front tires with tires that have higher grip than the ones in the Spike set it becomes precious. Spike Prime Tires don't have grip but looks good. :)
It is ideal to learn how to control robots in real world applications where nature plays bad jokes on the engineers.
The two color sensors look up so it can see the attachment control parts, so it decides what part of the program to run. It have only one attachment motor with only 1 attachment element - 28 Teeth and 4 holes Gear.
This is the beautiful version of the robot. :) It is more likely for having fun, than use it for competition. It have beautiful front that is not very useful for a competition, due to larger attachments, but it is a little bit more stable than the "uglier" and smaller version. :)
This robot is very low, relatively compact and very hard to control. To move as desired it must carry heavy attachment between its front tires. It also needs often clearing of its rear balls and the beads where they are positioned. Ones that is done the robot becomes pretty accurate. If you change the front tires with tires that have higher grip than the ones in the Spike set it becomes precious. Spike Prime Tires don't have grip but looks good. :)
It is ideal to learn how to control robots in real world applications where nature plays bad jokes on the engineers.
The two color sensors look up so it can see the attachment control parts, so it decides what part of the program to run. It have only one attachment motor with only 1 attachment element - 28 Teeth and 4 holes Gear.
Modification of the EV3 Competition Robot Full with light sensors attached to the front
Luly is a new STEAM competition robot from LEGO Education SPIKE Prime. We would use in some of the courses. This version of Luly have some light shields to protect the color sensor from ambient light. Check out the courses below and see how Luly is used to complete in a competition.
This is an example of a robot for Sumo Robotics competitions. Specifically for RoboteX challenge. As most of the Sumo competitions have specific requirements for the robot size this one follows the 15cm x 15cm requirements.
Sumo competitions could be quite fun and interesting as the goal is to push the other robot outside of the ring.
Building instructions for a LEGO Mindstorms EV3 Robot Base with 56mm Tires, Version1. The robot base could be used in robotics competitions as FIRST LEGO League, World Robotics Olympiad and others
This robot was built by your request. It includes NXT large wheels. The Large LEGOO Mindstorms wheels will give you a faster robot, but be careful, because it will not be that accurate.
We had a couple of minutes before starting another robot and we just came up with this robot. If you would like to build a Box Robot, but don't have enough parts this is a good construction that you could learn from. It has a frame. It has three motors. You can add attachments at the top.
This LEGO Mindstorms EV3 robot chassis has the brick positioned vertically. Interesting idea that could be very useful.