Building Instructions -

• FIRST LEGO League

-

• Ubuntu

Building instructions for this LEGO Mindstorms EV3 attachment for the FIRST LEGO League Nature's Fury robotics competition

This attachment is accomplishing three missions and partly one more mission from the FIRST LEGO League 2022-2023. It is for the Chain Monster robot. It solve mission 6 - HYBRID CAR, mission 14 - TOY FACTORY and mission 15 - RECHARGEABLE BATTERY. It partially solves mission 2 - OIL PLATFORM.

These are 3D Building Instructions for the Craft Creator mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

The Hybrid car and the Ramp are part of mission 6 from FLL 2022. Find the parts in Bag 6 and assembly the model following this 3D building instructions

These are 3D Building instructions for the Fuel Truck that is part of the Oil Platform mission . The truck is build from Bag 3 of the set

3D instructions for the Energy Storage mission from the FIRST LEGO League 2022-2023 mission model. Parts are in Bag 4 from the set

3D building instructions for the Power plant mission model from the FIRST LEGO League 2022 SUPERPOWERED competition. Find the parts in Bag 10

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Bench mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.

These are instructions on how to build the:

• Bench

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Red Building Units

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

FIRST^® LEGO^® League mission requirements need to be achieved by your robot through its programs and its use of equipment. You’re allowed to hand-rescue your robot, but that does cause this penalty. Be sure to pay extra attention to the rules where they talk about “Interruptions"

Penalty

• If you interrupt the robot: minus 3 each time
• Possible penalty totals: −18, −15, −12, −9, −6, −3, 0

Scoring Requirements

• Interruption needs to be observed by the referee.
• Upon penalty, the referee will place one penalty disc in the southeast triangle as a permanent interruption marker.
• You can get up to six such penalties.
• If a penalty disc comes off the triangle, it is simply returned, with no effect on score.

(mission descriptions source https://www.first-lego-league.org/)

This is an attachment for the Kriket Box robot that accomplishes multiple missions. The missions are connected with Push and Collect actions and are from the FIRST LEGO League 2022-2023 SUPER POWERED competition. The attachment is a little different than the recording because we improved it a little after that

This attachment is a great example for a precise drop attachment. It is designed for the Kriket Box Robot and accomplishes the M14 Toy Factory mission from the FIRST LEGO League 2022-2023 SUPER POWERED competition.

This is an active attachment with gears built from LEGO Education SPIKE Prime robotics set. The goal is to do a precise drop. The attachment could be used for both cargo items.

The orange connector is part of the Smart Grid mission. These are 3D building instructions for the mission model. Parts are located in Bag 5

This attachment demonstrates the principle of dropping a part inside a container. It uses parts only from the LEGO MINDSTORMS Robot Inventor 51515 set. The goal of the attachment is to release a lever that is holding the wheel.

This attachment demonstrates pushing and pulling with a circular motion. It is useful for FIRST LEGO League competitions where you can grad a mission model and bring it back to base or push/pull on a lever.

These are instructions on how to build the:

• Cargo plane
• 1x Gray container

You can find more building instructions and tips and tricks about the competition at this page.

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Cell Phone mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Tire Flip mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.