Building Instructions -

• FIRST LEGO League

These are instructions on how to build the:

• Bridge Ramp

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

If you take a look at the videos for this attachment you will see a nice idea on taking the track and the ambulance. These two vehicles from the FIRST LEGO League 2013 competition had to be collected and returned back to base.

Built from LEGO Mindstorms EV3 parts. 

This attachment is accomplishing four missions and partly two more mission from the FIRST LEGO League 2023-2024. It is for the Chain Monster Robot. It solve mission 1 - 3D CINEMA, mission 2 - Theater Scene Change, mission 5 - Augmented Reality Statue and mission 9 - Movie set. It partially solves mission 14 - Audience delivery and mission 15 - Expert delivery by taking Sam the Stage Manager to the base and delivering it to the movie set area.

These are 3D Building Instructions for the Rolling Camera mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

This attachment was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot. It is meant to help the robot complete the 5th mission of the FLL Cargo Connect competition.

These are instructions on how to build the:

• Step Counter

You can find more building instructions and tips and tricks about the competition on this page.

This is the attachment of Team "Nightbeast", with which they do:
M11–Escape Velocity and M13–Observatory
The Observatory result depends on the model. Sometimes the pointer is in the orange area otherwise in the white area.

Background

Soon after a launch, rocket engines often separate away from spacecraft by design, but that’s long before the spacecraft leaves the pull of gravity. So why doesn’t the spacecraft fall back to earth?

Mission

The robot needs to impact the strike pad hard enough to keep the spacecraft from dropping back down.

Scores

• Get the spacecraft to go so fast and high that it stays up, by pressing/hitting the strike pad: 24
• Possible scores: 0, 24

Scoring Requirements

• The result must be visible at the end of the match.
• Activate the spacecraft by pressing/hitting the strike pad. > Only allowed method. Must be observed by the referee.

(mission descriptions source https://www.first-lego-league.org/)

These are 3D Building Instructions for the Expert Delivery mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

These are 3D Building Instructions for the Augmented Reality Statue mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

This attachment was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot. It is meant to help the robot complete the 3rd mission of the FLL Cargo Connect competition.

This is the attachment to accomplish Fll 2019 M01 mission with the Whakatae. You can see how to attach the attachment to the robot in this tutorial.

These are instructions on how to build the:

• Tree

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

These are 3D Building Instructions for the Light Show mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

We use this attachment to demonstrate the principle of an active attachment. This is an attachment activated from the motor. It has one level attached to it. It could be reused. The attachment transfers power from the motor to the end of the lever and we can accomplish missions like the Power Switch mission from the FLLCasts Off-season mission models.

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Basketball mission and it is the second attachment for this mission. The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.

We've deprecated it because we build a better attachment

This is the attachment to accomplish Fll 2019 M06 mission with the Whakatae. You can see how to attach the attachment to the robot in this tutorial to do.

It also accomplish Fll 2019 M06 mission.

Background

The chance of a “serious” meteoroid hitting earth in our lifetime is extremely low, but it’s not zero, and the devastation could truly wipe us out. How will scientists and engineers keep us safe?

Mission

From west of the free-line, send one or both meteoroids independently to the meteoroid catcher. “Independently”: see also M01, Section “Scoring Requirements”.

Scores

• Meteoroid(s) touch(es) the mat in the centre section of the meteoroid catcher: 12 each
• Meteoroid(s) touch(es) the mat in either side section of the meteoroid catcher: 8 each
• Possible scores: 0, 8, 12, 16, 20, 24

Scoring Requirements

• The result must be visible at the end of the match.
• The meteoroids need to be sent over the free-line to touch the mat in the meteoroid catcher > Only allowed method. Must be observed by the referee.
• The meteoroids must be hit/released while they are clearly and completely west of the free-line. > Only allowed method. Must be observed by the referee.
• While between hit/release and scoring position, the meteoroid must be clearly independent. > Only allowed method. Must be observed by the referee.
• If ever the ring-set meteoroid is off its ring, you may remove the ring from the field by hand. This is a special exception to the rules.

(mission descriptions source https://www.first-lego-league.org/)

These are 3D Building Instructions for M05 Shark mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Shark for additional building possibilities.

These are 3D Building Instructions for the Music Concert Lights and Sounds mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.