Building Instructions -

• FIRST LEGO League

-

• LEGO Education SPIKE Prime

This is Kriket. Kriket is an example of a Box robot assembled from LEGO Education SPIKE Prime and could be used during a competition like FIRST LEGO League to achieve a smooth, repeatable behaviour of the robot. In fact. This is why it was designed. The goal of Kriket is to be a "Box Robot" and to allow for attachments to be glided on top of it. Check the courses for Kriket to understand more about how it could be used.

The robot requires a few more parts than the standard LEGO Education SPIKE Prime + Extension sets, but it is worth purchasing and having them

We experimented with building a box robot powered entirely by chains—a unique approach inspired by the original LEGO MINDSTORMS NXT Robots. Chains like these can be hard to find, but we thought: why not try to power both the robot and its attachments with them? This design not only powers the entire robot but also provides a great demonstration of how and when chains can be effectively used in robotics.

To build this robot, you'll need approximately 180 chain links (part 3711a), which are available in the NXT kits and some Technic sets.

Please note that this robot requires additional components beyond those included in the LEGO Education SPIKE Prime and SPIKE Essential kits. Check out the additional parts required.

Thinking about box robots with LEGO Education SPIKE Prime, Boxver is a good example. It is tiny, kind of small and has the brick in a vertical position. Two motors at the front. The goal of this robot is to achieve reliability and consistency of the behavior of the robot.

Luly is a new STEAM competition robot from LEGO Education SPIKE Prime. We would use in some of the courses. It's simple, it requires a really small number of parts and we can demonstrate most of the attachments and programs with it. Check out the courses below and see how Luly is used to compete in a competition.

This incredibly compact SPIKE Prime Box Robot is designed for competitions such as the FIRST LEGO League (FLL) and World Robot Olympiad (WRO). Named Whakatae, derived from the Māori word "whakataetae," meaning "competitive," this robot measures 17 LEGO units in length and 15 LEGO units in width. It features two color sensors in front of the wheels for precise alignment, two large motors for movement, and two medium motors for attachments.

The best part? You can build this SPIKE Prime Box Robot using just the Base Set, an additional large motor, and a color sensor!

This incredibly compact SPIKE Prime Box Robot is made for competitions like FIRST LEGO League (FLL) and World Robotics Olympiad (WRO). Whakatae (from Maori's word "whakataetae", which means "competitive") is long 17 LEGO units and is with a width of 15 LEGO units. In front of the wheels it has two color sensors which it uses to align. Whakatae also has two Large motors for moving and has two medium motors for attachments!

It's has "V2" in its name, because it's the second version of Whakatae - LEGO Education SPIKE Prime Competition Box robot. The difference between the two is that the first one can be built with only a Large Motor and a Color sensor in addition to the Base set, while this one needs an additional ball bearing. This provides this robot with a lot more stability and can be seen as a true upgrade to the first version.

The story goes like this. Two engineers meet at a bar (or on discord during the pandemic) discussing which robot to use for this year's FIRST LEGO League 2020 Replay Solution and Review with explanations. They started their cameras, had a hot Carolina Reaper, had an argument, hugged each other, and decided to build Gazon, and use this new robot for the competition. So here it is. Small, 4 motors, 2 color sensors, stable, light.

This attachment is designed for the Smaller Pancake - SPIKE Prime Box Robot and is used in the FIRST LEGO League 2025-2026 UNEARTHED competition. It completes Mission 13: Statue Rebuild, collects the other team’s minecart, delivers a flag next to the minecart extraction area, and transports all artifacts from the Right Base to the Left Base.

Luly is a new STEAM competition robot from LEGO Education SPIKE Prime. We would use in some of the courses. This version of Luly have some light shields to protect the color sensor from ambient light. Check out the courses below and see how Luly is used to complete in a competition.

This attachment is designed for the Smaller Pancake - SPIKE Prime Box Robot and completes Mission 14: Forum and Mission 15: Site Marking in the FIRST LEGO League 2025-2026 UNEARTHED competition. It delivers all the artifacts to the Forum and places the flag in its designated position nearby.

This attachment is designed for the Smaller Pancake - SPIKE Prime Box Robot and completes Mission 10: Tip the Scales in the FIRST LEGO League 2025-2026 UNEARTHED competition. It releases the large scale, latches onto the Scale Pan, and transports it safely back to base.

This attachment is designed for the Smaller Pancake - SPIKE Prime Box Robot and completes Mission 11: Angler Artifacts in the FIRST LEGO League 2025-2026 UNEARTHED competition. It aligns the robot with the Angler Artifacts mission model and rotates the gear mechanism to raise both the artifacts and the flagpole.

The goal of this robot attachment is to demonstrate a principle and example for lifting heavy objects vertically. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

This is a robot attachment that could be used to lift object. The gear ratio of this attachment is allows it to lift Heavy objects. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. The goal of the attachment is to demonstrate the principle and example of an attachment for heavy lifting that could be placed on the robot. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

Light Cooley is an extension of Cooley. We've added two Light/Color sensors to allow for lines to be followed and for the robot to alight to them and we've kept everything Cooley was cool and known about. Build a few attachments for it and take it on a ride for a FIRST LEGO League competition

Do you remember the Chain Monster Box Robot? This one is the same but without the chains. What is cool about this robot is you can use almost all Chain Monster attachments and build a lot more.

The Unchained Monster box robot requires additional parts on top of the LEGO Education SPIKE Prime and LEGO Education SPIKE Essentials. Check out the additional parts required.

With Robotistka we can almost use the full potential of the LEGO Education SPIKE Prime robot to prepare for robotics competitions like FIRST LEGO League. It is small, it is a Box Robot, it has two motors at the front and two color sensor for the line.

This is an active attachment. Active means that is is power by a motor. It's built with LEGO Education SPIKE Prime parts and it demonstrates how to build a lifting attachment for competitions in robotics like FIRST LEGO League/World Robotics Olympiad and others. Lifting is one of the most important parts when accomplishing missions at the competitions. What's interesting is that this attachment changes the orientation of rotation with it's gears. It is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

This is a robot attachment that could be placed at the front of a LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. The goal of the attachment is to demonstrate the principle and example of an attachment on the front of the robot. This specific robotics attachment can lift objects. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

This is an attachment trigger from the robot inertial. It's built with LEGO Education SPIKE Prime parts and it demonstrates how to move with the robot, stop, the attachment activates and it collects a few parts. The goal of the attachment is to collect parts from the field without the use of any motors. It is an easy and quick way to build an attachment for FIRST LEGO League/World Robotics Olympiad and other robotics competition. The principle is the same. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions