Video tutorials

Third, and last video of this series on how to use ONE attachment to solve the FLL 2014 World Class missions.

In this tutorial we will use Whakatae - LEGO Education SPIKE Prime Box robot to complete a mission run from the FIRST LEGO League 2019-2020 competition for the M08 Elevator mission. We accomplish 10 out of 10 in this mission. A similar approach is demonstrated with LEGO Mindstorms EV3 at FLL 2019: Accomplish every time. M08 Elevator. 10 out of 10 successful runs

This video tutorial is about understanding the "magic". In this video tutorial, we would conduct an experiment and will look at how exactly does the integral part of the PID algorithm compensate for the error that the LEGO Mindstorms EV3 robot makes. 

Starting with the World Robotics Olympiad 2014 Junior-High challenge we first catch the object on our path. We discuss a good mechanism for catching and lifting balls that can do two movements with one motor. 

Robotics competition is a large part of the FLL Competition. The field contains missions which give points and the main purpose is to gather maximum number of points for 2:30min. FIRST LEGO League competitions have different themes every year but the tasks have similar functionality. In this video tutorial we will give a brief of missions in Senior Solutions (the theme for 2012).

In this tutorial, we would drive the scissors mechanism and there are a number of rules that we must follow

This video tutorial is part of the series on how to make your robot 100% precise and accurate. We accomplish the M06. SPACE STATION MODULES mission 9 out of 10 times. The attachment works. Every time the attachment is started in successfully accomplishes the mission. It moves forward and attaches the space station module with the space station. 

Based on your feedback we have decided to show you the live process of building a complex LEGO Mindstorms Competition robot without having the whole robot ready yet. We are continuing from part 1 where we finished part of the 'front' of the robot and we arrived at a construction that we didn`t like and would fix in this video lesson.

The final way for lifting our box robot is by using a scissors mechanism. In this Episode, we would discuss the benefits and advantages of this mechanism.

In the video we improve on the robotics mechanism for pushing the different blocks out of the robot container. We continue from the previous video.

In this video we look at the robotics mechanism for dropping the different blocks into the different region on the World Robotics Olympiad 2013 field. 

All worked as expected, up until know because the robot got lost. This happens when we turn right and the line does not continue to the right. Now the robot must somehow understand that it is "lost" and escape.

After several questions about the use of the LEGO Mindstorms NXT Light Sensor with the EV3 software, we have decided to go through this problem in this video tutorial and pay special attention to the Raw Sensor Value Block.

Sometimes you could just throw a ball from base and solve a competition. Or at least many teams think so. In this video we would explore a very simple attachment for throwing balls from base. Can you use this for other missions? - we think so. Check out the video. 

We continue from part 4 where we made a controlled experiment to transfer power from a Mindstorms motor to the rear wheels. The construction was too complex and inefficient and in this video lesson we are improving it by lowering the differential and removing all gear wheels from this LEGO Mindstorms EV3 Competition robot. 

Extend the previously build attachment for the FIRST LEGO League (FLL) Nature's Fury competition so that we can move the Truck and Ambulance up and down. 

Sometimes when we are working with sensors it is important that the time between two consecutive samples is the same. This will make each sample equally important and independent of how much time it took to take it. In this video tutorial, we would use the EV3-G timer block to make a "WaitForTick" program where the time between each sample of the EV3 Gyro takes exactly 0.02 seconds. 

We continue from part 3 where we finished part of the 'rear'. Power is transfered from a motor to the wheels but having about 16 gear wheels makes it more than complex for this LEGO Mindstorms EV3 Competition robot. 

It has been a long road with the last 8 BigDaddy competition robots video tutorials, but we finally arrived at the Differential Lock. 

We continue the discussion of the Robot Design category from the FIRST LEGO League Competition. This time we stop on the programming - how to evaluate the programming of the team during its preparation for the competition.

Arriving at a final solution. There is still room for improvement on using the Mindstorms Ultrasonic Sensor for aligning to walls, but we hope the whole five videos could give you a good idea of how to start with a problem and reach a solution.

Based on a request from Abdulah we decided to build a tutorial on how to use Hi Technic Color Sensor and EV3-G Software. There is a special block imported in the software that helps you use the sensor.

Taking/Grabbing loops is one of the most common mission types at robotics competitions like FIRST LEGO League/World Robotics Olympiad. This tutorial is about an attachment that grabs the loop. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.