This is a ping-ball containing attachment for a World Robotics Olympiad. The attachment is building with LEGO Mindstorms EV3 parts. It is tiltel so that it is easier for the balls to fall off at certain points, which was part of the missions at the 2015 cmpetition.
LEGO Mindstorms Robot Base for a high placed attachment for containing ping pong balls. It is interesting how the balance is achieved with such an attachment. It was only one of the version in a series of LEGO Mindstorms Robots for World Robotics Olympiad.
This is one of the robots used in World Robotics Olympiad. It uses chains to move ping pong balls out of a container.
Building instructions for a Robot Grabber used in the World Robotics Olympiad competition runs. The grabber is build with LEGO Mindstorms EV3. The base of the robot is available at /materials/69-wro-robot-2014-elementary
Robot building instructions for a World Robot Olympiad with a large container used for collecting ping-pong balls
Инструкции за построяване на сейф. Средният двигател може да се използва за набиране на шифър чрез въртене. Бутоните на брика също могат да се използват за набиране на код за отваряне.
Единият голям мотор отключва резето на капака, другият голям мотор повдига капака автоматично.
Building instructions for the catapult that could be placed over the LEGO Mindstorms EV3 Brick. The idea of the catapult it to throw objects. The fact that it is over the brick makes it very convenient to place the motors below the brick and to use the Catapult.
This robot construction itself was used in the FIRST LEGO League Senior Solutions competition
Building instructions for the robot used in WRO 2014. It is a small robot with two light sensors and could be used for collecting elements.
The robot is built from LEGO Mindstorms EV3 parts.
Building instructions for this LEGO Mindstorms EV3 attachment for the FIRST LEGO League Nature's Fury robotics competition
This attachment presents a way to mechanically align the robot to a mission model and solves the Cloud mission from FLL 2014.
Building instructions for a LEGO Mindstorms EV3 Truck Robot Attachment for the FIRST LEGO League 2013 Nature's Fury robotics competition
Building instructions for a LEGO Mindstorms EV3 Ambulance Robot Attachment for the FIRST LEGO League 2013 Nature's Fury robotics competition. The attachment grabs the ambulance car and slightly lifts it. The rubber bands help with triggering the attachment at the right time
User this flywheels construction for experiments in physics. Start rotating the wheel and they would accumulate energy. You can try to calculate this energy and to measure how fast it would be consumed.
The construction is built with LEGO Mindstorms EV3
Building instructions for the One Attachment. Built from LEGO Mindstorms EV3 parts and with an Ultrasonic sensor we've used this attachment to accomplish most of the missions at FIRST LEGO League 2013.
SIngle robot attachment, many points.
If you take a look at the videos for this attachment you will see a nice idea on taking the track and the ambulance. These two vehicles from the FIRST LEGO League 2013 competition had to be collected and returned back to base.
Built from LEGO Mindstorms EV3 parts.
Building instructions for the LEGO Mindstorms robot attachment used at the FIRST LEGO League Natures Fury Competition. This robot attachment takes two of the building and moves them without demolishing them. It is a good example of the use of gear wheels and worm gear. The gear wheels move levers in opposite directions.
Инструкции за строене на ЛесенБот, робот направен с LEGO Mindstorms комплект, който се използва в нашите уроци. ЛесенБот има два двигателя и две гуми. Третото му колелце... вижте сами как е построено третото му колело.
