
Яшлъ - LEGO SPIKE Prime робот с цветен сензор
Яшлъ, от турски, означава стар човек.
Този робот е направен за запознаване с цветния сензор. Той се движи с помощта на два средни двигателя и има цветен сензор отстрани.
- #1902
- 30 Jul 2024
Яшлъ, от турски, означава стар човек.
Този робот е направен за запознаване с цветния сензор. Той се движи с помощта на два средни двигателя и има цветен сензор отстрани.
Кадере, от латински, означава падане.
Този робот е направен да прилича на падаща кула от увеселителен парк. Използва големият техник зъбен венец за да достигне голяма височина. Зъбния венец се движи от голям мотор. На падащата платформа има място за ЛЕГО минифигура, което може да се маха. Това може да се усети чрез сензор за разстояние, което означава, че атракцията работи само когато на нея има някой!
Колесо, от словашки, означава колело.
Този робот е направен да се движи като моноколело. Това става като премества ценъра на тежестта си по голям техник зъбен венец. За да постигне това използва два средни мотора с малки зъбни колела на тях. Роботът не може да завива, но е доста готин!
Тембиас, от гуарани, означава истории.
Роботът се движи с помощта на два двигателя с големи колела. Отпред има сензор за сила, за да усети когато се блъска.
We use this positioning attachment with the Kriket box robot and it's run of five missions in a row
This is an alternative model for the FIRST LEGO League 2022-2023 SUPERPOWERED built only with LEGO Education SPIKE Prime parts. The goal of the model is to be able to experiment and learn without the need to have the real parts, that at this moment are almost impossible to find and gather.
This is an alternative model for the FIRST LEGO League 2022-2023 SUPERPOWERED build only with LEGO Education SPIKE Prime parts. The goal of the model is to be able to experiment and learn without the need to have the real parts, that at this moment are almost impossible to find and gather.
This attachment was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot. It is meant to help the robot complete the 13th mission of the FLL Cargo Connect competition.
This is a passive attachment used for FIRST LEGO League 2021-2022 Cargo Connect mission called Large Delivery. The attachment has a locking mechanism to lock the large wing to allow us to safely carry it.
Уйду, от турски, означава сателит.
Инструкции за LEGO SPIKE Prime робот с държач за телефон! Роботът също може да се движи с 2 средни мотора.
This is a flip attachment. Arguably the flip missions are some of the most interesting on FLL competitions. The purpose of this attachment is to accomplish the FIRST LEGO League 2020 Cell Phone Mission. It contains two four gear wheels. It is an active attachment. It changes the direction with gear wheels. There is a lot one could learn from such an attachment. It is also build only from parts in the LEGO Mindstorms Robot Inventor Set.
This is part one of an FLL 2020 attachment used to accomplish the pull-up bar mission. This is the part of the attachment that stays below the robot. We put the whole robot on this attachment and we move. It is an interesting approach because as we move to the pull up bar this attachment detaches itself from the robot.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
The Bench mission in FIRST LEGO League 2020 was one of the more complex missions during the competition. It involved two things - lifting part of the mission model and bringing it back to base and in the same time dropping 4 different boxes which was difficult to achieve. We came up with two solutions for SPIKE Prime and for Robot Inventor and this is the Robot Inventor solution. Take a look. You will learn how to build complex attachments doing more than one thing at a time.
Are you a football fan? Here are the building instructions you'll need for the construction of the Football Goal, if you decide to play it with a Mindstorms 51515 Robot Inventor set. You'll also need to build the smallest robot Tricky with its Kick the ball attachment. The Mindstorms/Duplo ball is included in the set.
You can find the LEGO set, with which this was built, by following this link.
You can find constructions created to play with Tricky, by following the links below:
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
This is the VEX advanced skills training ground for building your driving skills. Here you have to pick up the construction and put it on the table at the opposite side of the table and then go to finish. It is the single player mode field because it is designed for a single robot to run on the field.
This table is like the first VEX training ground for developing your driving skills, but is for two robots. The idea is to come first to the final without interfering with the opponent robot.