Building Instructions

This attachment was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot. It is meant to help the robot complete the 13th mission of the FLL Cargo Connect competition.

This is a passive attachment activated by the robot and not by a motor. It's used for accomplishing the FIRST LEGO League 2021-2022 Cargo Connect Home Delivery mission model.

This is a passive attachment used for FIRST LEGO League 2021-2022 Cargo Connect mission called Large Delivery. The attachment has a locking mechanism to lock the large wing to allow us to safely carry it.

This attachment is a demonstration of how easy to detach attachment could be build for LEGO MINDSTORMS Robot Inventor robot where both the robot and the attachment is from the same 51515 set. The principle is useful for accomplishing missions where the mission model should be placed on the FIRST LEGO League field and in the same time should be supported in a way. Check out the tutorial for a demonstration.

This is a light shield over the color sensor. Covered from the light the color sensor is much more precise.

This is a flip attachment. Arguably the flip missions are some of the most interesting on FLL competitions. The purpose of this attachment is to accomplish the FIRST LEGO League 2020 Cell Phone Mission. It contains two four gear wheels. It is an active attachment. It changes the direction with gear wheels. There is a lot one could learn from such an attachment. It is also build only from parts in the LEGO Mindstorms Robot Inventor Set.

With this LEGO robot attachment from LEGO Mindstorms Robot Inventor we accomplish the Rowing Machine from FIRST LEGO League 2020. The attachment works like a hook that catches the wheel of the Rowing Machine mission model and pulls on it. There are gear wheels that transfer the power from the robot motors to the hook at the end. This attachment shows the principle of catching things

This is part one of an FLL 2020 attachment used to accomplish the pull-up bar mission. This is the part of the attachment that stays below the robot. We put the whole robot on this attachment and we move. It is an interesting approach because as we move to the pull up bar this attachment detaches itself from the robot.

These are instructions on how to build the:

• Storage racks
• 3x Containers (lime green, light orange, and blue)

You can find more building instructions and tips and tricks about the competition on this page.

During a competition a team of students had to build a robot that looks like a musician. This construction in front of the robot is a Trompet and it looks like Ane is playing some music. If you play music on the phone on the side it is really funny to watch it play.

The Bench mission in FIRST LEGO League 2020 was one of the more complex missions during the competition. It involved two things - lifting part of the mission model and bringing it back to base and in the same time dropping 4 different boxes which was difficult to achieve. We came up with two solutions for SPIKE Prime and for Robot Inventor and this is the Robot Inventor solution. Take a look. You will learn how to build complex attachments doing more than one thing at a time.

This is the Coffee Pot, along with a coffee mug. It was 2 hours of fun

The robot is named after the South Pole–Aitken basin, the largest impact crater in the Solar System that has been discovered on the far side of the Moon.

Astronauts, prepare to enter lunar orbit! This robot comes equipped with a stand that can hold a camera or a phone in order to take a picture of the far side of the moon. If your phone or camera does not fit, the stand can be easily modified to suit your needs. With its two motors, Aitken can make both wide and narrow circles around the Moon to ensure the perfect shot!

These are instructions on how to build the:

• Light Tire Flip

You can find more building instructions and tips and tricks about the competition on this page.

This is the VEX advanced skills training ground for building your driving skills. Here you have to pick up the construction and put it on the table at the opposite side of the table and then go to finish. It is the single player mode field because it is designed for a single robot to run on the field.

This table is like the first VEX training ground for developing your driving skills, but is for two robots. The idea is to come first to the final without interfering with the opponent robot. 

This was an idea. You would we demonstration a multi-axle power and rotation transmitting box. Well, here it is. Build it. Start it. And see how the power from the motor is transmitted through different axles. The lever will demonstrate it.