Building Instructions -
Filters:
Глава на Овен от ЛЕГО Майндстормс EV3
Този модул е направен да изглежда като глава на овен направена с ЛЕГО Майндстормс EV3. Тя използва ултразвуков сензор, който е насочен надолу, все едно овена атакува, като очи. Може да се комбинира с други модули за да се направи перфектният робот-овен!
- #970
- 24 Jan 2020
Платна на кораб от ЛЕГО Майндстормс EV3
Този модул е направен да изглежда и да се движи като платна на истински кораб! Модулът се състои от две мачти, които са свързани за да се движат заедно. Задната мачта е свързана към среден мотор, който може да движи всички платна и също е свързан към жироскопичен сензор, който засича дали целият кораб се е завъртял. Този модул се използва в Йоланда - LEGO Mindstorms EV3 робот кораб.
- #973
- 24 Jan 2020
Sorting sheet for EV3 Mindstorms Set (English language)
Purpose
We want students to be able to easily find the parts and to put the parts back in the designated compartments.
Printing instructions
Files are printed on both sides of 160-gram sheet of paper A3 format.
The sorting sheet is designed to fit in the cover of the box. To gather in the lid, the excess parts of the printed sheet must be cut off the markers on the front of the sheet.
To extend the life of the sheets, you can laminate them either with a "laminate matte" or a simple laminate. The disadvantage of the simple laminate is that there is a lot of gloss. The disadvantage of laminate matte is that it has to be sealed with a clear PVA C-200 adhesive to prevent it from opening over time.
Turning direction
We recommend printing doublesided and turning over the "short edge", like a book. If you decide, you may flip the printed result over the long side. Both options are available at you local print center.
- #831
- 24 Jun 2019
Dispenser mission model. FLLCasts Off-season Challenge 2019
Building instructions for the dispenser mission model. The models is used in the Logistics mission of FLLCasts Off-season Challenge 2019.
- #777
- 22 May 2019
Ремило - LEGO Mindstorms EV3 робот лодка
Ремило идва от езика есперанто и означава гребло.
Робота прилича на лодка, но се движи по земя. Използва два големи мотора с закачени "гребла" за да се движи. Заради странния начин на движение, използва жиро сензор за да се движи в правилната посока.
- #744
- 17 May 2019
FLL 2018: Nightbeast Multi-purpose Attachment. M06, M10, M12
This is the attachment of Team "Nightbeast", with which they :
1. M10–Food Production
2. M12–Satellite Orbits
3. Move the Cone Module to base
From Missions M06, M10 and M12 from FLL Into Orbit Challenge
The run with this attachment is very inconsistent and fails very often.
- #733
- 17 May 2019
FTC Push Bot Building guide
The building guide for the FIRST Technical Challenge Push Bot build with the Tetrix set
- #278
- 09 Apr 2017
- 1
FiveMinuteBot build with NXT
Instructions for building the five minutebot used in the tutorial.
- #35
- 08 Feb 2013
- 1
FLL 2023: Alternative model for Light Show for Chain Monster - FIRST LEGO League 2023-2024 MASTERPIECE
These are Alternative 3D Building Instructions for the Light Show mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition to be used with the Chain Monster Box Robot. A single accurate rotation of the white arrow indicates a perfect mission completion.
- #2528
- 01 Nov 2024
Sumo, Line following and color sensor mat for B2
This is the mat that's needed for level B2 from the SPIKE Prime curriculum. It features a sumo field with a curved outer line for line following. It also has 3 red and 3 green lines for tasks that need the robot to stop at first and third line.
The size is set in the pdf so you can print it as is.
- #2330
- 01 Nov 2024
FLL 2023: An attachment to deliver Izzy and Anna for M15 and solve M03, M04 and M11 from FIRST LEGO League 2023-2024 MASTERPIECE Competition
This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot. The attachment solves the light show mission using rubber bands! It works well, but it does depend on how new your model is. On newer models it can work with only 2 red rubber bands or even with 2 yellow and 2 red. Find the best combination for your field.
The trigger for the light show mechanism also releases Anna the Museum Curator and the masterpiece on the pedestal.
- #2364
- 01 Nov 2024
Base line following robot with exposed sensor
This robot is made to serve as a cautionary tale for the line following robots with exposed to the ambient light sensors.
- #1861
- 19 Sep 2024
FLL 2023: An attachment to collect Izzy for M15 and solve M12 and M13 from FIRST LEGO League 2023-2024 MASTERPIECE Competition
This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot.It collects Izzy using a rubber band mechanism, solves the M13 Craft Creator with a hook and M12 Virtual Reality Artist using a gear that goes into the mission model.
- #2264
- 19 Sep 2024
FLL 2023: An attachment to solve M12 from FIRST LEGO League 2023-2024 MASTERPIECE Competition
A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.
This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.
- #1870
- 19 Sep 2024
FLL 2023: An attachment to solve M11 from FIRST LEGO League 2023-2024 MASTERPIECE Competition
A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.
This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.
- #2001
- 19 Sep 2024