Building Instructions

We wanted to be with the spirit of Halloween, so we decided to give you a little scene which you can build at home. These parts are ordinary and could be found anywhere. Here are links for the sets:

• Bat
• Ghost
• Pumpkin

Happy Halloween from the FLLCasts team!

Published 07/19/2019

Accomplish three FIRST LEGO League missions at once. This is an interesting Large multi-purpose FLL attachment for a box robot that could be used to accomplish a number of missions with a single exit of the field base. 

This is an attachment for the cases where you need a two touch bumper sensors. It could be placed on almost any LEGO Mindstorms EV3 robot.

Here is another great example of a large multi-purpose attachment used in FIRST LEGO League competitions. This one is specifically for the 2017-2018 Hydrodynamics competitions and is doing a number of missions. (01) Pipe removal, (06) Water Treatment and (08) Manhole cover. 

The attachment consists of two parts. The first part is placed on the robot while the second part is in front of the robot and the robot pushes it. While working on the field the robot leaves the second part on the Water Treatment plant and when returning back collects it back and returns to base.

The goal of the attachment is for you to build it and experiment with it with the existing field. Use Box Robot 2 as a robot base on which to add the attachments.   

A robot that was used in the WRO Elementary 2018 Robot competition. It is a nice idea of how the motors could control different levers to push things around

Probably the largest multi-purpose FLL attachment at FLLCasts. These attached is doing a number of missions at once. 4 of them. You attach it to the robot and start the program. The robot moves and accomplishes a number of missions using only this attachment. At it also has a lot of parts. It is quite large and you can not build it from a single set. But that's ok because you are preparing for a competition, right?

Building instructions for a Wall-E like robot. The robot is on treads, driven by two Large EV3 motors. Has two static hands and an ultrasonic sensor on top. 

This was an idea. You would we demonstration a multi-axle power and rotation transmitting box. Well, here it is. Build it. Start it. And see how the power from the motor is transmitted through different axles. The lever will demonstrate it.

Two missions in one. This attachment accomplishes the Hydrodynamics Fountain and Faucet missions from the FIRST LEGO League Hydrodynamics 2017-2018 competitions. The attachment shows a really interesting and widely used approach of a single attachment that is used for two, three and even more missions. This is a standard practice for many of the advanced teams, especially those that reach the finals. The based of the robot is the LEGO Box Robot Three With Large Wheels and Thee light sensors and one Gyro 

These are building instructions for an attachment accomplishing the FIRST LEGO League 2017-2018 Slingshot mission. The based of the robot is LEGO Box Robot Three With Large Wheels and Thee light sensors and one Gyro

Winter might be far away or it might just be coming - depending of course on where you are in the world. But you can always spend a few hours having fun with a LEGO Mindstorms Snowmobile. A really challenging construction that requires good preparation, concentration and a lot of efforts to complete. Same is going to the mountain in the winter. But the reward at the end is worth it. 

Building instructions with dimensions on the ball collecting mechanism for the FIRST Technical Challenge Push Bot. The collecting mechanism should be attached to the Chassis - https://www.fllcasts.com/materials/382-ftc-push-bot-chassis-from-tetrix

We have to admit. This is quite an interesting missions. There is a Manhole cover and it must be turned upside down. Well, the robot must turn it. Again LEGO Box Robot Three With Large Wheels and Thee light sensors and one Gyro is used as a base for the Robot.

The is the whole step-by-step process of connecting the motors with the Raspberry PI with the driver and the batteries. No scheme needed. Everything is already here. In the course, the motors are part of the car and the batteries are in the batteries holder, but with this scheme, you could see the whole process.