Building Instructions

This attachment is a great example for a precise drop attachment. It is designed for the Kriket Box Robot and accomplishes the M14 Toy Factory mission from the FIRST LEGO League 2022-2023 SUPER POWERED competition.

This is an active attachment with gears built from LEGO Education SPIKE Prime robotics set. The goal is to do a precise drop. The attachment could be used for both cargo items.

3D building instructions for the Power plant mission model from the FIRST LEGO League 2022 SUPERPOWERED competition. Find the parts in Bag 10

3D instructions for the Energy Storage mission from the FIRST LEGO League 2022-2023 mission model. Parts are in Bag 4 from the set

The orange connector is part of the Smart Grid mission. These are 3D building instructions for the mission model. Parts are located in Bag 5

These are 3D Building instructions for the Fuel Truck that is part of the Oil Platform mission . The truck is build from Bag 3 of the set

These are instructions on how to build the:

• Cargo plane
• 1x Gray container

You can find more building instructions and tips and tricks about the competition at this page.

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Bench mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.

These are instructions on how to build the:

• Bench

You can find more building instructions and tips and tricks about the competition on this page.

This is the attachment to accomplish Fll 2019 M07 mission with the Dominator robot. You can see how to attach the attachment to the robot in this tutorial.

These are instructions on how to build the:

• Red Building Units

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

The data log from the experiment when moving forward and keeping straight with an implementation for Proportional compensation. 

FIRST^® LEGO^® League mission requirements need to be achieved by your robot through its programs and its use of equipment. You’re allowed to hand-rescue your robot, but that does cause this penalty. Be sure to pay extra attention to the rules where they talk about “Interruptions"

Penalty

• If you interrupt the robot: minus 3 each time
• Possible penalty totals: −18, −15, −12, −9, −6, −3, 0

Scoring Requirements

• Interruption needs to be observed by the referee.
• Upon penalty, the referee will place one penalty disc in the southeast triangle as a permanent interruption marker.
• You can get up to six such penalties.
• If a penalty disc comes off the triangle, it is simply returned, with no effect on score.

(mission descriptions source https://www.first-lego-league.org/)

This attachment for the Nautiq robot is designed to accomplish M10 Send over the Submersible in the FIRST LEGO League 2024‑2025 SUBMERGED competition. It uses a gear mechanism to lift a LEGO axle, allowing the submarine to slide to the other side.

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.

These are 3D Building Instructions for M08 Artificial Habitat mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Artificial Habitat for additional building possibilities.

These are 3D Building Instructions for M12 Feed the Whale mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Feed the Whale for additional building possibilities.