Building Instructions -

• FIRST LEGO League 2024-2025 SUBMERGED

-

• Ubuntu

This attachment is designed for the Smaller Pancake - SPIKE Prime Box Robot and is used to complete Mission 05: Who Lived Here?, Mission 06: Forge, and Mission 07: Heavy Lifting in the FIRST LEGO League 2025-2026 UNEARTHED competition. The attachment positions the robot accurately in front of the mission models and interacts with each mechanism in sequence. In one run, it presses the Forge lever to release the stones, activates the Who Lived Here? model, and pushes a stone into the Right base. In a separate run, it pushes or captures the Millstone and transports it to the Right base.

These are 3D Building Instructions for M03 Coral Nursery mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. This mission model does not have an alternative due to the specificity of the parts.

The Rollie robot is a compact, box-shaped robot built entirely using LEGO Spike Prime components. It incorporates six Technic Gear 28-Tooth Double Bevel gears, even though the standard Spike Prime set includes only five. If you don't have a spare gear, you can substitute the two front gears with a Technic Connector Circular with 2 Pin Holes and 3 Axle Holes, or any other compatible gear available in the set. Rollie is engineered with a minimalist design approach, using a limited number of parts from both the base set and the expansion pack, making it efficient and easy to rebuild.

This simple active pinless attachment for the Nautiq robot is designed specifically to accomplish mission M08 Artificial Habitat in the FIRST LEGO League 2024‑2025 SUBMERGED challenge. It offers a minimalist, efficient mechanism ideal for reliably completing the mission. No motors are required—setup is quick and intuitive. The compact design ensures stable performance and easy integration with the Nautiq robot.

This attachment for the Nautiq robot is designed for missions M13 Coral Reef, M12 Raise the Coral, and M09 Release the Shark from the FIRST LEGO League 2024-2025 SUBMERGED competition. It features a passive mechanical trigger that releases a lever powered by a rubber band. A passive curtain mechanism is included for collecting parts from the field. The attachment is optimized for quick and reliable mission execution without additional motors.

These are 3D Building Instructions for M05 Shark mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Shark for additional building possibilities.

These are 3D Building Instructions for M11 Raise the Mast mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Raise the Mast for additional building possibilities.

These are 3D Building Instructions for M04 Coral Reef mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Coral Reef for additional building possibilities.

These are 3D Building Instructions for M07 Angler Fish mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Angler Fish for additional building possibilities.

This attachment for the Nautiq robot is designed to accomplish M10 Send over the Submersible in the FIRST LEGO League 2024‑2025 SUBMERGED competition. It uses a gear mechanism to lift a LEGO axle, allowing the submarine to slide to the other side.

These are 3D Building Instructions for M08 Artificial Habitat mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Artificial Habitat for additional building possibilities.

These are 3D Building Instructions for M12 Feed the Whale mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Feed the Whale for additional building possibilities.

These are 3D Building Instructions for M15 Research Vessel mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Research Vessel for additional building possibilities.

This attachment for the Nautiq robot is designed to accomplish M15 Research Vessel in the FIRST LEGO League 2024‑2025 SUBMERGED competition. It includes one detachable part: the hook is removed after collecting the Research Vessel, and the remaining part is used to deliver it to its target location.

This attachment for the Nautiq robot is designed to lift the coral for M01 Coral Nursery from the FIRST LEGO League 2024‑2025 SUBMERGED competition. It performs two actions simultaneously: lifting the mission model loop and opening the door that holds the Reef Segments.

This set of two attachments for the Nautiq robot is designed to collect and deliver the scuba diver for M01 Coral Nursery and M04 Scuba Diver, collect the shark for M02 Shark, and flip the coral reef for M03 Coral Reef in the FIRST LEGO League 2024‑2025 SUBMERGED competition. One attachment is mounted from above, and the other from below, allowing efficient execution of multiple missions in a single run.

These are 3D Building Instructions for M14 Sample Collection mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. This mission model does not have an alternative due to the specificity of the parts.

These are 3D Building Instructions for M09 Unexpected Encounter mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Unexpected Encounter for additional building possibilities.

This set of two attachments for the Nautiq robot is designed to solve multiple missions from the FIRST LEGO League 2024‑2025 SUBMERGED competition. It completes M05 Angler Fish, collects 4 Krills for M12 Feed the Whale, gathers all Reef Segments for M03 Coral Reef, and collects all Samples for M14 Sample Collection. The two-attachment design allows for efficient execution of multiple tasks in a single run.

This attachment for the Nautiq robot is designed to accomplish M07 Kraken’s Treasure and M06 Raise the Mast from the FIRST LEGO League 2024‑2025 SUBMERGED competition. It features a passive treasure chest collecting mechanism and uses hooks to restrict the inertia-driven movement of the Mast, allowing fast movements without triggering it prematurely.