Attachment used to transfer the motion from the motor from a vertical axle to a horizontal axle. Uses two gear wheels. Could be built with LEGO Mindstorms EV3 and LEGO Mindstorms NXT kits.
The goal of this robot attachment is to demonstrate a principle and example for lifting heavy objects vertically. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.
This robot attachment shows you how to limit the rotation of a lever. It uses two gear wheels to transfer the motion on 90 degrees.
It could be built with LEGO Mindstorms EV3 and NXT versions. Most of the time during competitions like FIRST LEGO League and World Robotics Olympiad you need a lever for just a limited motion
Шаси за робот от ЛЕГО Mindstorms EV3, при който колелата са отпред. Тъй като това шаси е построено с комплекта EV3, можете да го използвате за основа, която да надградите с приставки.
This is a robot attachment that could be used to lift object. The gear ratio of this attachment is allows it to lift Heavy objects. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. The goal of the attachment is to demonstrate the principle and example of an attachment for heavy lifting that could be placed on the robot. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.
No need for all attachments to be powered by motors and to include gears. It's sometimes possible to use a simple robot attachment to collect objects. Such attachments we call passive and this one is an example for the Box Robot Chassis.
Build with LEGO Mindstorms EV3
Light Cooley is an extension of Cooley. We've added two Light/Color sensors to allow for lines to be followed and for the robot to alight to them and we've kept everything Cooley was cool and known about. Build a few attachments for it and take it on a ride for a FIRST LEGO League competition
Инструкции за построяване на основа за робот от ЛЕГО Mindstorms EV3, която може да се използва във FIRST LEGO League, World Robotics Olympiad или други състезания по роботика.
With Robotistka we can almost use the full potential of the LEGO Education SPIKE Prime robot to prepare for robotics competitions like FIRST LEGO League. It is small, it is a Box Robot, it has two motors at the front and two color sensor for the line.
.
We have to admit. This is quite an interesting missions. There is a Manhole cover and it must be turned upside down. Well, the robot must turn it. Again LEGO Box Robot Three With Large Wheels and Thee light sensors and one Gyro is used as a base for the Robot.
Do you remember the Chain Monster Box Robot? This one is the same but without the chains. What is cool about this robot is you can use almost all Chain Monster attachments and build a lot more.
The Unchained Monster box robot requires additional parts on top of the LEGO Education SPIKE Prime and LEGO Education SPIKE Essentials. Check out the additional parts required.
Lifter is an pretty fast and pretty strong attachment that lift up... things... like exercise machine, astronauts and other stuff.
A program for that attachment in Into Orbit 09 - Strength Exercise challenge is located at programs/hm9c06-lifter-an-attachment-for-suv-box-robot-and-into-orbits-m09-strength-exercise-program.
A simple active attachment that could be added to the Box Robot Chassis.
This is a LEGO Mindstorms EV3 competition robot used in FIRST LEGO League Season 2018-2019 Into Orbit following a Box Robot principle. The robot has passed through the following competitions in Brazil:
Local competition in scho
Regional: Northeast
National: Rio de Janeiro
International: Uruguay
The robot is an modular construction that you could easily build upon. It is not entirely "clean" as it has parts of it not optimezed as in the other box robots, but it is a nice example and a great work from the FLL team.
This is an active attachment. Active means that is is power by a motor. It's built with LEGO Education SPIKE Prime parts and it demonstrates how to build a lifting attachment for competitions in robotics like FIRST LEGO League/World Robotics Olympiad and others. Lifting is one of the most important parts when accomplishing missions at the competitions. What's interesting is that this attachment changes the orientation of rotation with it's gears. It is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.
This is a LEGO Mindstorms EV3 competition robot used in FIRST LEGO League competitions and used by a team in Brazilian regionals. It followsa Box Robot principle. The robot has passed through the following competitions in Brazil:
Local competition in scholl
Regional: Northeast
National: Rio de Janeiro
International: Uruguay
It is not entirely "clean" as it has parts of it not optimezed as in the other box robots, but it is a nice example and a great work from the FLL team.
The central axle of the robot is most of the time the most important. The robot moves forward and does things with this axle. It is important to learn to you could extend such axles, and change the level and position of the extensions.
This is a LEGO Mindstorms EV3/NXT robot attachment.
These are instructions on how to build the:
for the FIRST LEGO League 2019-2020 City Shaper Challenge.
You can find more building instructions and tips and tricks about the competition on this page.
This is a robot attachment that could be placed at the front of a LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. The goal of the attachment is to demonstrate the principle and example of an attachment on the front of the robot. This specific robotics attachment can lift objects. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.
Here is another great example of a large multi-purpose attachment used in FIRST LEGO League competitions. This one is specifically for the 2017-2018 Hydrodynamics competitions and is doing a number of missions. (01) Pipe removal, (06) Water Treatment and (08) Manhole cover.
The attachment consists of two parts. The first part is placed on the robot while the second part is in front of the robot and the robot pushes it. While working on the field the robot leaves the second part on the Water Treatment plant and when returning back collects it back and returns to base.
The goal of the attachment is for you to build it and experiment with it with the existing field. Use Box Robot 2 as a robot base on which to add the attachments.