Building Instructions -

• FIRST LEGO League

-

• EV3-G

These are instructions on how to build the:

• Boccia Frame

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Heavy Tire Flip

You can find more building instructions and tips and tricks about the competition on this page.

This is one of the spacers that the Nightbeast team used in FLL 2018/19 Into Orbit Challange

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.

We use this positioning attachment with the Kriket box robot and it's run of five missions in a row

This is an alternative model for the FIRST LEGO League 2022-2023 SUPERPOWERED built only with LEGO Education SPIKE Prime parts. The goal of the model is to be able to experiment and learn without the need to have the real parts, that at this moment are almost impossible to find and gather.

This is an alternative model for the FIRST LEGO League 2022-2023 SUPERPOWERED build only with LEGO Education SPIKE Prime parts. The goal of the model is to be able to experiment and learn without the need to have the real parts, that at this moment are almost impossible to find and gather.

This attachment was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot. It is meant to help the robot complete the 13th mission of the FLL Cargo Connect competition.

This is a passive attachment used for FIRST LEGO League 2021-2022 Cargo Connect mission called Large Delivery. The attachment has a locking mechanism to lock the large wing to allow us to safely carry it.

This is a passive attachment activated by the robot and not by a motor. It's used for accomplishing the FIRST LEGO League 2021-2022 Cargo Connect Home Delivery mission model.

This attachment is a demonstration of how easy to detach attachment could be build for LEGO MINDSTORMS Robot Inventor robot where both the robot and the attachment is from the same 51515 set. The principle is useful for accomplishing missions where the mission model should be placed on the FIRST LEGO League field and in the same time should be supported in a way. Check out the tutorial for a demonstration.

This is a light shield over the color sensor. Covered from the light the color sensor is much more precise.

This is a flip attachment. Arguably the flip missions are some of the most interesting on FLL competitions. The purpose of this attachment is to accomplish the FIRST LEGO League 2020 Cell Phone Mission. It contains two four gear wheels. It is an active attachment. It changes the direction with gear wheels. There is a lot one could learn from such an attachment. It is also build only from parts in the LEGO Mindstorms Robot Inventor Set.

With this LEGO robot attachment from LEGO Mindstorms Robot Inventor we accomplish the Rowing Machine from FIRST LEGO League 2020. The attachment works like a hook that catches the wheel of the Rowing Machine mission model and pulls on it. There are gear wheels that transfer the power from the robot motors to the hook at the end. This attachment shows the principle of catching things

This is part one of an FLL 2020 attachment used to accomplish the pull-up bar mission. This is the part of the attachment that stays below the robot. We put the whole robot on this attachment and we move. It is an interesting approach because as we move to the pull up bar this attachment detaches itself from the robot.

These are instructions on how to build the:

• Storage racks
• 3x Containers (lime green, light orange, and blue)

You can find more building instructions and tips and tricks about the competition on this page.

The Bench mission in FIRST LEGO League 2020 was one of the more complex missions during the competition. It involved two things - lifting part of the mission model and bringing it back to base and in the same time dropping 4 different boxes which was difficult to achieve. We came up with two solutions for SPIKE Prime and for Robot Inventor and this is the Robot Inventor solution. Take a look. You will learn how to build complex attachments doing more than one thing at a time.

These are instructions on how to build the:

• Light Tire Flip

You can find more building instructions and tips and tricks about the competition on this page.

This is an alternative model for the FIRST LEGO League 2022-2023 SUPERPOWERED built only with LEGO Education SPIKE Prime parts. The goal of the model is to be able to experiment and learn without the need to have the real parts, that at this moment are almost impossible to find and gather.

This is an alternative mission model for FIRST LEGO League 2022-2023 SUPERPOWERED Hybrid Car mission model. It is alternative as you only need LEGO Education SPIKE Prime parts to build it and you don't need the real parts from the real competition