These are 3D Building Instructions for the Music Concert Lights and Sounds mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.
We use this attachment to demonstrate the principle of an active attachment. This is an attachment activated from the motor. It has one level attached to it. It could be reused. The attachment transfers power from the motor to the end of the lever and we can accomplish missions like the Power Switch mission from the FLLCasts Off-season mission models.
These are instructions on how to build the:
for the FIRST LEGO League 2019-2020 City Shaper Challenge.
You can find more building instructions and tips and tricks about the competition on this page.
These are 3D Building Instructions for M05 Shark mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Shark for additional building possibilities.
These are 3D Building Instructions for M11 Raise the Mast mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Raise the Mast for additional building possibilities.
This is an attachment for accomplishing missions from FIRST LEGO League 2022-2023 SUPER POWERED competition. We use this attachment additionally to another one that you can see the the lessons for this attachment. The goal is to execute the actions of Push and Collect, and this is the perfect passive attachment for this.
These are 3D Building Instructions for the Sound Mixer mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.
These are 3D Building Instructions for the Movie Set mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.
This is an attachment for the top of the robot and the attachment is used for lifting different parts. It is reusable as we could change the lever and use the attachment for a number of different missions.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
This is the attachment of Team "Nightbeast", with which they :
1. Inserts the Tube Module into the Habitation Hub port, west side
2. Move all four Core Samples so they are no longer touching the axle that held them in the Core Site Model
3. Place the Gas Core Sample completely in Base
From missions M05 and M06 from FLL Into Orbit Challenge
Building instructions for the LEGO Mindstorms robot attachment used at the FIRST LEGO League Natures Fury Competition. This robot attachment takes two of the building and moves them without demolishing them. It is a good example of the use of gear wheels and worm gear. The gear wheels move levers in opposite directions.
This attachment is accomplishing three missions and partly two more missions from the FIRST LEGO League 2022-2023. It is for the Chain Monster robot
These are 3D Building Instructions for the Virtual Reality Artist mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.
These are 3D Building Instructions for the Masterpiece mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.
3D building instructions for the solar farm energy unit in FIRST LEGO League 2022. Find the parts in Bag 1
This reusable attachment could easily be placed on the side of a LEGO MINDSTORMS Robot Inventor robot and accomplish different missions that require the robot to interact with mission models. It uses gear wheels.
This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Boccia mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.. With this attachment we follow the line with the robot until we reach the team mission and we use the lever on the top to push the blue box. Then we follow the line to reach the Boccia mission, and three things happen: 1. align to the mission model with the front of the attachment, 2. turn the lever to release the green boxes and 3. move the lever to push on the mission model. This is a complex mission requiring a lot of coordination from the robot. Quite interesting I must say.
This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Pull-up bar mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.
A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.
The offset beam creates a hook-like motion when rotating the gear, making "hooking" in loops an easy task.