This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot. It solves M10 Sound Mixer using a passive attachment and collects Noah, the sound engineer using an inertial attachment.
This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot. The attachment solves the light show mission using rubber bands! It works well, but it does depend on how new your model is. On newer models it can work with only 2 red rubber bands or even with 2 yellow and 2 red. Find the best combination for your field.
The trigger for the light show mechanism also releases Anna the Museum Curator and the masterpiece on the pedestal.
A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.
The offset beam creates a hook-like motion when rotating the gear, making "hooking" in loops an easy task.
A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.
This attachment is designed to detach, once it completes its purpose. Due to the way, the attachment is left on the mission model, it slides from, creating distance between itself and the mission model, therefore meeting the requirement that no attachment should be touching the mission model at the end of the competition. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.
This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot.It collects Izzy using a rubber band mechanism, solves the M13 Craft Creator with a hook and M12 Virtual Reality Artist using a gear that goes into the mission model.
A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.
This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.
This attachment is accomplishing three missions and partly two more missions from the FIRST LEGO League 2022-2023. It is for the Chain Monster robot
This is an attachment for the Kriket box robot. It demonstrates how to build attachments that glide over the robot, are pinless and could be quickly and easily replaced and changed with another attachment. This attachment also lifts. Quite cool. Quite cool.
These are 3D building instructions for an extensible and configurable attachment for FIRST LEGO League 2021 Cargo Connect and the Sorting Center mission. The attachment has 3 axles, and we can place these axles in all kinds of configurations.
This is the robot that we use to demonstrate a solution for competition. This is a Post season solution. We never release any solutions during the season as this will have a negative impact on the competition. But after the competition we try to make a review and to see how we could have accomplish it. Our goal is to be better for next year.
This robot is quite powerful. The attachment mechanism on the front is one of a kind as it can do several things with a single motor: it can lift, it can unlock, it can grab. All of this thanks to the unique mechanism of gears
This is a heavy lifting attachment and it can lift mission models vertically. It is build entirely from LEGO MINDSTORMS Robot Inventor 51515 parts. This is one of the more complex and interesting attachments that we demonstrate in the course and it show how a few gear wheels and levers could be used to change the motion from circular to linear. This is powerful concept that could be very valuable during FIRST LEGO League competitions.
We use this attachment to demonstrate the principle of an active attachment. This is an attachment activated from the motor. It has one level attached to it. It could be reused. The attachment transfers power from the motor to the end of the lever and we can accomplish missions like the Power Switch mission from the FLLCasts Off-season mission models.
This is an attachment for the top of the robot and the attachment is used for lifting different parts. It is reusable as we could change the lever and use the attachment for a number of different missions.
An attachment designed for Heavy lifting. It's build with LEGO MINDSTORMS Robot Inventor 51515 and it has a gear wheels mechanism that allows you to increase the torque and lift really heavy things. Build the attachment and check out the tutorial. This will teach you one more principle that you could use for FIRST LEGO League competitions.
With this LEGO Education SPIKE Prime attachment we accomplish the basketball mission from the FIRST LEGO League 2020 RePlay competition. The goal of the mission is to put the ball into the basket and to have the basket up at the end of the round. This is a complex attachment. It uses gear wheels and warm gears to transfer the power from the motor to the top of the attachment. At the top of the attachment there is a wheel with a rope. The rope is build with LEGO Education SPIKE Prime parts. If you have the chance, use a different LEGO rope, but if you don't that this one will be ok.
This is a robot attachment that could be used to lift object. The gear ratio of this attachment is allows it to lift Heavy objects. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. The goal of the attachment is to demonstrate the principle and example of an attachment for heavy lifting that could be placed on the robot. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.
Dominator is a compact LEGO Mindstorms EV3 Box robot from the family of the Roller Coaster and Kiddo box robots. Similar to the previous two robots, Dominator also can move its front part up, down, left and right. This robot also has the same length of movement as its two predecessors of this type - 8 LEGO pins on the side and up.
The difference is that Dominator has fewer parts and has a perfect center of weight that allows it to use large attachments and lift heavy objects without threatening its stability. The movement on the X and Y axes has the same gear ratio. The light sensors are attached to the movable part of the robot which enables it to both follow a line and recognize the color of various object with height lower than 7 LEGO units.
This attachment have a guider mechanism that align the robot to the attachment. The attachment woks with SUV Box Robot.
The program is at programs/1zfoc7-module-with-aligning-attacher-for-m08-aerobic-exercise-program
Lifter is an pretty fast and pretty strong attachment that lift up... things... like exercise machine, astronauts and other stuff.
A program for that attachment in Into Orbit 09 - Strength Exercise challenge is located at programs/hm9c06-lifter-an-attachment-for-suv-box-robot-and-into-orbits-m09-strength-exercise-program.
