Building Instructions -

• Collect

This attachment is part of a second version of attachments for accomplishing the M07, M08 and M15 where we have to push and collect in the FIRST LEGO League 2022-2023 competition. It is for the Kriket Box Robot and we are doing this second version to make sure there are enough examples of how to use the Kriket box robot.

The interesting part about this attachment is how it connects to the robot. The Kriket has two brown axles that are connected to the motors via a gear mechanism. The attachment is attached to these brown axles which transfer the motor movement to the attachment.

The first of a series of attachments that we add to a World Robotics Olympiad LEGO Mindstorms Robot. The attachment is an example for collecting ping-balls. The robot and the attachment are in the same construction. The attachment is a base for a container that could be extended.

This are building instructions for a second mechanism for collecting cubes. This mechanism is designed for VEX Robot Base 1 and can be used for solving VEX IQ Challenge Highrise 2014-2015.

This attachment is accomplishing four missions and partly two more mission from the FIRST LEGO League 2023-2024. It is for the Chain Monster Robot. It solve mission 1 - 3D CINEMA, mission 2 - Theater Scene Change, mission 5 - Augmented Reality Statue and mission 9 - Movie set. It partially solves mission 14 - Audience delivery and mission 15 - Expert delivery by taking Sam the Stage Manager to the base and delivering it to the movie set area.

This is the robot that we use to demonstrate a solution for the World Robot Olympiad 2021 Junior competition. This is a Post season solution. We never release any solutions during the season as this will have a negative impact on the competition.

We started with this robot and it has a few good ideas. It can collect two cars at the same time. We later decided to go for a more powerful robot. Check out WRO 2021 Junior: Slaimi - a post season WRO competition solution robot

These are 3D Building Instructions for M05 Shark mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Shark for additional building possibilities.

This are the building instructions for a mechanism, collecting cubes. It is designed as an attachment for VEX Robot Base 5 and can be used to solve the VEX IQ Challenge High rise 2014-2015.

These are 3D Building Instructions for M11 Raise the Mast mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Raise the Mast for additional building possibilities.

This attachment is accomplishing three missions and partly two more missions from the FIRST LEGO League 2022-2023. It is for the Chain Monster robot

This is an attachment for accomplishing missions from FIRST LEGO League 2022-2023 SUPER POWERED competition. We use this attachment additionally to another one that you can see the the lessons for this attachment. The goal is to execute the actions of Push and Collect, and this is the perfect passive attachment for this.

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

The offset beam creates a hook-like motion when rotating the gear, making "hooking" in loops an easy task.

These are 3D Building Instructions for M04 Coral Reef mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Coral Reef for additional building possibilities.

These are 3D Building Instructions for M07 Angler Fish mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Angler Fish for additional building possibilities.

This is an attachment for the Kriket Box robot that accomplishes multiple missions. The missions are connected with Push and Collect actions and are from the FIRST LEGO League 2022-2023 SUPER POWERED competition. The attachment is a little different than the recording because we improved it a little after that

These are 3D building instructions for an extensible and configurable attachment for FIRST LEGO League 2021 Cargo Connect and the Sorting Center mission. The attachment has 3 axles, and we can place these axles in all kinds of configurations.

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment is designed to be thrown back to the base, with the lifted model it collected, before the robot returns, so the team can start loading the model to the next attachment, while the robot is still moving. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.

Mitko is an example for a small robot from LEGO Education SPIKE Prime. It has no sensors, but it has a big container, like a big mouth. So it can collect things, although it can not see them. Like a small animal that is blind, but hungry. Mitko could be used as a base for a robot that needs to collect. In was one of the versions of a robot that we used for a World Robot Olympiad competition.

These are 3D Building Instructions for M09 Unexpected Encounter mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Unexpected Encounter for additional building possibilities.

These are 3D Building Instructions for M14 Sample Collection mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. This mission model does not have an alternative due to the specificity of the parts.

This set of two attachments for the Nautiq robot is designed to collect and deliver the scuba diver for M01 Coral Nursery and M04 Scuba Diver, collect the shark for M02 Shark, and flip the coral reef for M03 Coral Reef in the FIRST LEGO League 2024‑2025 SUBMERGED competition. One attachment is mounted from above, and the other from below, allowing efficient execution of multiple missions in a single run.