Video tutorials

The robot removes the backrest, flattens the bench, and gets cubes into the hopscotch spaces.

The robot slides the people (called “slide figures”) down the slide and moves them to other areas.

The robot slides the step counter slow and steady. The farther the “walk,” the better.

This video is part of a series where we show you how our Box Robot accomplished the M10 Steel Construction mission 10 out of 10 times. The attachment is a basic lever and all the 'heavy lifting' is done by the x-y movement of the Dominator robot. This mission is one of the hard missions, because the construction is big and heavy and this requires precise movement of the robot.

This video is part of a series where we show you how our Box Robot accomplished the M08 Elevator mission with 100% accuracy. The idea is that the robot pushes with enought force in the right spot, which makes the elevator turn over. The interesting thing is that the Dominator robot moves the lever after it pushes the elevator. This makes the move back possible, because the lever is now not in the way of the mission model.

This video is part of a series where we show you how our Box Robot accomplished the M07 Swing mission 10 times. This mission has a black and white line parallel right next to it, the only thing you need to figure out is how to avoid the first supporting beam of the swing. The Dominator robot waits to be clear of the beam and then uses the x-y movement of its front mottors to position the lever so it pushes the swing loose. After that the robot moves back and is ready for action again.

After downloading the SPIKE programming software, you’ll need to connect to your hub in order to load a program to your robot. Let’s take a look at how you can do that!

In this tutorial we will use Whakatae - LEGO Education SPIKE Prime Box robot to complete a mission run from the FIRST LEGO League 2019-2020 competition for the M08 Elevator mission. We accomplish 10 out of 10 in this mission. A similar approach is demonstrated with LEGO Mindstorms EV3 at FLL 2019: Accomplish every time. M08 Elevator. 10 out of 10 successful runs

In this tutorial we accomplish the Elevated places with the Whakatae - LEGO Education SPIKE Prime Competition Box robot mission. It is important to be able to go over the mission model and at the end with a simple mechanism we just push the mission model at the end

Scores

Only one counts per stack

If an Upgrade (solar panels, roof garden, insulation) is Independent, and Supported only by a Stack which is at least partly in any Circle:

• 10 For Each Upgrade

(mission descriptions source https://www.first-lego-league.org/)

Bring the blocks to a specific place on the field in a specific way

Scores:

score one or the other

If there is a team-designed Structure clearly bigger than a Blue Building Unit, built only from your white LEGO bricks

• Completely In any Circle: 15 
• Partly in any Circle: 10

Note: Design and build your own Structure before you compete, then bring that to each Match. You don’t build it during the Match.

Note: Your mission 11 Structure needs to be built from Bag 10 elements only. It can include the red and gray elements. Not all of the Bag 10 elements need to be used.

(mission descriptions source https://www.first-lego-league.org/)

If the Steel Structure is Standing, and is Independent, and Supported only by its hinges as shown

Scores:

If the Test Building is Independent and Supported only by the blue beams, and some beams have been knocked out at least half way:

• 1 Beam - 10
• 2 Beams - 20
• 3 Beams - 30
• 4 Beams - 40
• 5 Beams - 50 
• 6 Beams - 60

(mission descriptions source https://www.first-lego-league.org/)

Scores:

Score one or the other

If the Elevator’s moving parts are Independent, and Supported only by its hinges as shown, in the following position:

• Blue Car Down: 15 or
• Balanced: 20

(mission descriptions source https://www.first-lego-league.org/)