Programs

EV3-G program developer for the FIRST LEGO League 2019 City Shaper Elevator Mission. The robot calibrates the possible of the attachment and then moves forward and backward to complete the mission

Program for the FIRST LEGO League 2019 City Shaper Swing mission. The attachment is attached on the robot and it we just start the program

When running the program place the robot as already aligned to the black line before the mission model

The program should be easy to execute. It basically moves the robot forward

MyBlock that makes a turn on specific degrees with minimal inaccuracy.

Input parameters:

• TurningAngle - The angle on which you want to turn your robot.
• MotorPower - The power with which your robot will rotate at first time
• CorrectionPower - The power with which your robot will correct it's turning to make it perfect

The block that constanlty increase the speed while turning. The goal of this is to reduce the acceleration of the robot when it starts turning so that no modules will fall.
There is only one input parameter in this block and this is the Angle on which you want your robot to rotate.

The program that Nightbeast team use for their second Run in FLL Into Orbit Challange. In this run they еject the 2x4 Brick by placing a Regolith Core Sample into the 3D Printer, make the Crater Crossing mission and scores a meteoroid (shoot a ball).

The program that Nightbeast team use for their second Run in FLL Into Orbit Challange. In this run they tries to make missions M10–Food Production, M12–Satellite Orbits and Move the Cone Module to base. But this program should be upgraded.

This is the program for the self aligning passive attachment for rendezvous and meeting between the tube module and the habitation hub. The material is Self Aligning Module Attacher for M06 - Space Station ModulesCreator

The program that Nightbeast team use for their second Run in FLL Into Orbit Challange. In this run they Inserts the Tube Module into the Habitation Hub port on the west side, move all four Core Samples so they are no longer touching the axle that held them in the Core Site Model and place the Gas Core Sample completely in Base. 

The program that Nightbeast team use for their first Run in FLL Into Orbit Challange. In this run they solve two missions:  SpaceTravel and Solar Panel .