Barrier mission model.FLLCasts Off-season Challenge 2019
Building instructions for the barrier mission model. The model is used in the Parking Control mission of FLLCasts Off-season Challenge 2019.
- #775
- 22 May 2019
Building Instructions
Filters:
Ремило - LEGO Mindstorms EV3 робот лодка
Ремило идва от езика есперанто и означава гребло.
Робота прилича на лодка, но се движи по земя. Използва два големи мотора с закачени "гребла" за да се движи. Заради странния начин на движение, използва жиро сензор за да се движи в правилната посока.
- #744
- 17 May 2019
Barbell On a Stand - Example Mission Model
Simple mission model, that can be used for competition preparation in class. The model consists of two parts - a stand that can be fixed on a mat, floor or table using a double sided tape and a barbell. The aim is to either take the barbel from the stand and bring it to a target location or the other way round.
- #556
- 30 Oct 2017
Speed bump mission model. FLLCasts Off-season Challenge 2019
Building instructions for the speed bump mission model. The models is used in the Speed bump mission of FLLCasts Off-season Challenge 2019.
- #784
- 22 May 2019
Dispenser mission model. FLLCasts Off-season Challenge 2019
Building instructions for the dispenser mission model. The models is used in the Logistics mission of FLLCasts Off-season Challenge 2019.
- #777
- 22 May 2019
Connect Front Steering Motor to Raspberry Pi - 3D Scheme
A 3D scheme on how to connect the front steering motor to the Raspberry PI. This includes the Motor Driver and the batteries. The rear motor is also on this scene.
- #507
- 10 Apr 2018
Construction plates mission models. FLLCasts Off-season Challenge with LEGO Mindstorms EV3
Building instructions for the construction plates mission models. The models are used in the Road construction mission of FLLCasts Off-season Challenge with LEGO Mindstorms EV3.
- #779
- 22 May 2019
How to connect L298N Motor Driver To Batteries Power - 3D Scheme
3D scheme on how to connect the L298N Motor Driver to the Batteries. Follow the step-by-step instructions. Be careful about the PCB terminal connectors.
- #505
- 10 Apr 2018
How to connect L298N To Motor And Batteries
3D scheme with instructions on how to connect the L298N driver to the batteries and to the motor. Just that. Connecting to the Raspberry Pi is at a later stage of the course.
- #506
- 10 Apr 2018
How to Add a diode to indicate controller power up - 3D Scheme
3D Instructions on how to add a diode to the Raspberry Pi and indicate when the Raspberry Pi is turned on.
- #502
- 10 Apr 2018
Insert The SD Card into the Raspberry Pi
Step by step guide on how to add the SD card to the Raspberry pi.
The Raspberry Pi must not be powered.
- #501
- 10 Apr 2018
Tetrix FTC Pipe attachment constructions
Shows the pipe attachment constructions that is mounted on the robot. The pipe is than mounted on this constuctions
- #284
- 30 Nov 2017
- 2
How to connect a Light Emitting Diode (LED) directly to Batteries
These are 3D building instructions on how to connect a diode directly to the batteries and turn it on.
- #443
- 17 Mar 2018
FTC cut template for a pipe to collect and store balls
Drawing on how to cut a pipe to be able to collect and store balls in this pipe. The sheet format is ISO A4 and the drawing size is real (100% scale)
- #283
- 02 Jun 2017
- 7
FTC 200 mm Axle Dimensions
This is a blueprint of dimensions of the FTC 200 mm axle.
- #289
- 18 May 2017
- 2
Hangout print material for playing the game on paper
Use this handout material to learn more about the game and how to play it
- #85
- 09 Mar 2016
- 1