Building Instructions

These are instructions on how to build the:

• Crane

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

This is an attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. On a robot most of the time you place attachments on the front/side/top. These instructions show how to build an attachment that could be placed on the front of the robot. The idea is to demonstrate the principle and you can expand and build a more specific attachment for the mission that you are accomplishing. Check the courses in which this attachment is used for more information and tutorials on how to use it.

This is a carabiner attachment for taking loops. It is built with LEGO Education SPIKE Prime parts and it demonstrates how to successfully take loops. The goal of the attachment is to lock the loop after it catches it. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions

Background

For rovers in other worlds, getting stuck is definitely not okay! Teams of rovers can help each other, but a lone rover needs to be very careful.

Mission

The robot or whatever agent-craft it sends out needs to cross the craters model completely, by driving directly over it. Not near it. Not around it.

Scores

• Robot or agent-craft crossed the craters model completely: 20
• Possible scores: 0, 20

Scoring Requirements

• All weight-bearing features of the crossing equipment must cross completely between the towers. > Only allowed method. Must be observed by the referee.
• The crossing must be from east to west, and make it completely past the flattened gate. > Only allowed method. Must be observed by the referee.

(mission descriptions source: https://www.first-lego-league.org/)

This is the forth type of an active geared attachment. "Active" means that is is power by a motor. "Geared" means that it uses gears. "Reusable" means that you can easily extend the attachment with additional parts - eg - you can reuse it. It shows a basic principle of how power is transferred between different axles that have different orientation in space - like when one of the axles is horizontal and the other is vertical. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad and others. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

This is an pinless robot attachment designed for taking loops. It's built with LEGO Education SPIKE Prime parts and it demonstrates how to collect a loop while moving with the robot. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. There are other attachment that are designed for taking a loop and locking it so that it does not fall, but they are more complex. Search for 'Carabiner' at FLLCasts.com

This attachment have a guider mechanism that align the robot to the attachment. The attachment woks with SUV Box Robot.

The program is at programs/1zfoc7-module-with-aligning-attacher-for-m08-aerobic-exercise-program

Building instructions for a LEGO Mindstorms EV3 Ambulance Robot Attachment for the FIRST LEGO League 2013 Nature's Fury robotics competition.    The attachment grabs the ambulance car and slightly lifts it. The rubber bands help with triggering the attachment at the right time

Building instructions for the Pinless Rubber Band Attachment:

This robot attachment in inspired by one of the most interesting missions we've seen at FIRST LEGO League competitions - the Manhole Cover (08th) Mission in FIRST LEGO League 2017-2018 . The attachment demonstrates how you could flip an object. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

This is an attachment that could be easily detached after a mission is accomplished. It's built with LEGO Education SPIKE Prime parts and it demonstrates an important principle for building attachments for robotics competitions like FIRST LEGO League/World Robotics Olympiad and others. You move with the robot, you complete the mission and you leave the attachment on the field when the mission is completed. In this way you save time when adding the attachment as it is most of the time pinless and takes a fraction of a second to put it. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

Attachment part of a series of robot attachments for accomplishing the FIRST LEGO League 2013 competition. This specific construction lifts the two vehicles. It uses rubber bands for locking the levers. Take a look at the video tutorials for details explanation on how it works.

Build from LEGO Mindstorms EV3 parts.

Background

Space is quiet and beautiful, but with almost no heat, air, nor air pressure, it could freeze, suffocate, and boil you all at once! Help our spacewalking astronaut “Gerhard” get to safety.

Mission

The robot needs to get Gerhard’s body into the airlock chamber.

Scores

• Astronaut completely in the habitation hub’s airlock chamber: 22 OR
• Astronaut partly in the habitation hub’s airlock chamber: 18
• Possible scores: 0, 18, 22

Scoring Requirements

• For this mission, the word “body” includes all parts except the loop.
• Results must be visible at the end of the match.

(mission descriptions source https://www.first-lego-league.org/)

Background

To live away from earth, it would help if we were good at detecting and mining resources under the surfaces of other planets, moons, asteroids, and even comets.

Mission

The robot needs to get all the core samples out of the core site model, then it has options for what to do with them as described here, and in mission M03.

Scores

• Move all four core samples so they are no longer touching the axle that held them in the core site model: 16
• Place the gas core sample so it is touching the mat, and completely in the lander’s target circle: 12 OR
• Place the gas core sample completely in base: 10
• Place the water core sample so it is supported only by the food growth chamber: 8
• Possible Scores: 0, 16, 24, 26, 28, 34, 36

Scoring Requirements

• Results must be visible at the end of the match.

(mission descriptions source: https://www.first-lego-league.org/)

This is the first type of an active geared attachment. "Active" means that is is power by a motor. "Geared" means that it use gears. "Reusable" means that you can easily extend the attachment with additional parts - eg - you can reuse it. It shows a basic principle of how power is transferred between different axles that have different orientation in space- like when one of the axles is horizontal and the other is vertical. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad and others. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

Interesting and useful attachment for dropping a LEGO human at a specific location. It uses a lever and a gear wheel. When the lever is pressed the wheel rotates.

The attachment is constructed from LEGO Mindstorms EV3 sets.

Background

It is amazingly expensive to send heavy stuff like construction material into space, so scientists and engineers are instead learning how to print what they need in space, using available extraterrestrial elements.

Mission

The robot needs to get a regolith core sample and place it into the 3D printer, which will cause the 2 × 4 brick to pop out. The ejected 2 × 4 brick can then be delivered elsewhere for more points.

Scores

• The 2 × 4 brick ejected and completely in the northeast planet area: 22 OR
• The 2 × 4 brick ejected and not completely in the northeast planet area: 18
• Possible scores: 0, 18, 22

Scoring Requirements

• Results must be visible at the end of the match.
• Eject the 2 × 4 brick by placing a regolith core sample into the 3D printer. > Only allowed method. Must be obserserved by the referee.

(mission descriptions source: https://www.first-lego-league.org/)

This LEGO attachment connects a LEGO Mindstorms EV3 Motor with a LEGO Technic Linear Actuator. The connection is through a couple of gears which makes the whole instructions quite interesting and useful as an example. 

The attachment was used during FIRST LEGO League 2014 Robotics competition.