Building Instructions -

• EV3-G

3D scheme with instructions on how to connect the L298N driver to the batteries and to the motor. Just that. Connecting to the Raspberry Pi is at a later stage of the course. 

These are 3D building instructions on how to connect a diode directly to the batteries and turn it on. 

In Robopartans classes we needed a few parts the the robot could lift in a competition. These is a box that is suitable for this

Shows the pipe attachment constructions that is mounted on the robot. The pipe is than mounted on this constuctions

This attachment is designed for the Smaller Pancake - SPIKE Prime Box Robot and completes Mission 12: Salvage Operation and part of Mission 15: Site Marking in the FIRST LEGO League 2025-2026 UNEARTHED competition. It raises the ship, pulls the sand lever to clear the sand, and places a flag in its designated position next to the Salvage Operation mission model.

These are 3D Building Instructions for an Alternative M06 Angler Fish mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. For the original mission model, see M06 Angler Fish.

This attachment for the Nautiq robot is designed to align the robot accurately during the FIRST LEGO League 2024‑2025 SUBMERGED competition. It improves positioning consistency, helping ensure precise and repeatable mission runs.

These are 3D Building Instructions for an Alternative M12 Feed the Whale mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. For the original mission model, see M12 Feed the Whale.

This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot. It solves M10 Sound Mixer using a passive attachment and collects Noah, the sound engineer using an inertial attachment.

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.

This construction is ment as a addition to the base line following robot with exposed sensor.

This is an alternative model for the FIRST LEGO League 2022-2023 SUPERPOWERED built only with LEGO Education SPIKE Prime parts. The goal of the model is to be able to experiment and learn without the need to have the real parts, that at this moment are almost impossible to find and gather.

This is an alternative mission model for FIRST LEGO League 2022-2023 SUPERPOWERED Hybrid Car mission model. It is alternative as you only need LEGO Education SPIKE Prime parts to build it and you don't need the real parts from the real competition

This is an alternative model for the FIRST LEGO League 2022-2023 SUPERPOWERED build only with LEGO Education SPIKE Prime parts. The goal of the model is to be able to experiment and learn without the need to have the real parts, that at this moment are almost impossible to find and gather.

This is an alternative model that could be built from parts available in the LEGO Education SPIKE Prime set. Use the model to learn how to accomplish missions like this.

This is the Chicken mission model from the World Robot Olympiad 2024 Elementary competition in 3D assembly instructions.