These are 3D building instructions for an active pinless attachment from LEGO Education SPIKE Prime set. The attachment is used along with the Gazon robot to push mission models.
Forth version of a reusable gear attachment. Again, it powers two axles and this time there is a lever connected to one of the axles.
First version of a reusable gear attachment. By following the same principle for assembling the attachments you can change the direction of the gear wheels and build powerful attachments that could accomplish missions in any direction.
This flip attachment from LEGO MINDSTORMS Robot Inventor 51515 set is design to flip parts. It can flip a manhole for example, but could also flip other parts. The principle of flipping is quite interesting as it uses two axles and a border.
This is an pinless robot attachment designed for taking loops. It's built with LEGO MINDSTORMS Robot Inventor parts and it demonstrates how to collect a loop while moving with the robot. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. There are other attachments that are designed for taking a loop and locking it so that it does not fall, but they are more complex. Search for 'Carabiner' at FLLCasts.com
This is an attachment positioned below the robot and used for when we need to push something with the robot. It keeps the cargo in place while pushing. In this way we can achieve a consistent behavior with the robot, which is what we all want
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Slide mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.
One pumpkin spice latte coming right up! This robot is made to serve the best drinks in the whole continent! It is one of the simpler robots that can be made with the LEGO SPIKE Prime set and it uses two medium motors to move around. The coolest part about the robot is the cup holder where a "cup" can be attached or removed. Bottoms up!
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
Магазино(Magazzino) от италиански означава склад.
Този робот е направен да дърпа и държи обекти. Той използва два големи мотора за да се движи и един среден за хващача. Хващачът е отпред на робота и се състои от две "ръце", които са свързани към две зъбни колела, свързани със средния мотор, което им позволява да се движат като хващач.
Building instructions for the truck mission model. The model is used in the Road assistance mission of FLLCasts Off-season Challenge 2019.
Building instructions for the bowling pins mission models. The models are used in the Bowling mission of FLLCasts Off-season Challenge 2019.
Where do you keep your robots? We like to keep them ordered....
Actually we lied. It is almost always a mess wtih boxes and parts everywhere. We had sum FUN building this IKEA Billy and putting some of the FIRST LEGO League Mission Models.
Attachment for lifting object, especially hex balls if you have them from the Crossover competition.
