Building Instructions -

• Java

- you should attach it to the motor, depending on the orientation of the motor.

- you should attach it to the motor, depending on the orientation of the motor

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment is designed to be thrown back to the base, with the lifted model it collected, before the robot returns, so the team can start loading the model to the next attachment, while the robot is still moving. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.

This attachment is accomplishing three missions from the FIRST LEGO League 2023-2024. It is for the Chain Monster Robot. It solve mission 8 - Rolling camera, mission 12 - Virtual reality artist and mission 13 - Craft creator.

These are 3D Building Instructions for M12 Feed the Whale mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Feed the Whale for additional building possibilities.

Mitko is an example for a small robot from LEGO Education SPIKE Prime. It has no sensors, but it has a big container, like a big mouth. So it can collect things, although it can not see them. Like a small animal that is blind, but hungry. Mitko could be used as a base for a robot that needs to collect. In was one of the versions of a robot that we used for a World Robot Olympiad competition.

Alternative to Bag 14 - Cargo Plane Alternative Model - FIRST LEGO League 2021-2022 CARGO CONNECT

These are 3D building instructions for an active pinless attachment from LEGO Education SPIKE Prime set. The attachment is used along with the Gazon robot to push mission models.

Forth version of a reusable gear attachment. Again, it powers two axles and this time there is a lever connected to one of the axles.

This flip attachment from LEGO MINDSTORMS Robot Inventor 51515 set is design to flip parts. It can flip a manhole for example, but could also flip other parts. The principle of flipping is quite interesting as it uses two axles and a border.

First version of a reusable gear attachment. By following the same principle for assembling the attachments you can change the direction of the gear wheels and build powerful attachments that could accomplish missions in any direction.

This is an pinless robot attachment designed for taking loops. It's built with LEGO MINDSTORMS Robot Inventor parts and it demonstrates how to collect a loop while moving with the robot. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. There are other attachments that are designed for taking a loop and locking it so that it does not fall, but they are more complex. Search for 'Carabiner' at FLLCasts.com

This is an attachment positioned below the robot and used for when we need to push something with the robot. It keeps the cargo in place while pushing. In this way we can achieve a consistent behavior with the robot, which is what we all want

These are instructions on how to build the:

• Cargo plane from innovation project bricks

You can find more building instructions and tips and tricks about the competition on this page.