Building Instructions -

• EV3-G

These are instructions on how to build the:

• Red Building Units

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

This is the good not so old Pesho Bot Chassis with a "two bars" lifting mechanism and a hand. It can be build with any set. Only the omni-wheels are extra, but what is a good robot without an omni-wheels.

The program for this robot is at programs/a6hrcz-pesho-bot-with-two-bars-lifting-mechanism-controls-with-modkit

The data log from the experiment when moving forward and keeping straight with an implementation for Proportional compensation. 

FIRST^® LEGO^® League mission requirements need to be achieved by your robot through its programs and its use of equipment. You’re allowed to hand-rescue your robot, but that does cause this penalty. Be sure to pay extra attention to the rules where they talk about “Interruptions"

Penalty

• If you interrupt the robot: minus 3 each time
• Possible penalty totals: −18, −15, −12, −9, −6, −3, 0

Scoring Requirements

• Interruption needs to be observed by the referee.
• Upon penalty, the referee will place one penalty disc in the southeast triangle as a permanent interruption marker.
• You can get up to six such penalties.
• If a penalty disc comes off the triangle, it is simply returned, with no effect on score.

(mission descriptions source https://www.first-lego-league.org/)

This is the initial construction of a catapult. The base on which we will place the rest of the robot. The goal of this construction is to give the catapult the ability to rotate.

This attachment is a great example for a precise drop attachment. It is designed for the Kriket Box Robot and accomplishes the M14 Toy Factory mission from the FIRST LEGO League 2022-2023 SUPER POWERED competition.

This is an attachment for the Kriket Box robot that accomplishes multiple missions. The missions are connected with Push and Collect actions and are from the FIRST LEGO League 2022-2023 SUPER POWERED competition. The attachment is a little different than the recording because we improved it a little after that

This is an active attachment with gears built from LEGO Education SPIKE Prime robotics set. The goal is to do a precise drop. The attachment could be used for both cargo items.

The orange connector is part of the Smart Grid mission. These are 3D building instructions for the mission model. Parts are located in Bag 5

This attachment demonstrates the principle of dropping a part inside a container. It uses parts only from the LEGO MINDSTORMS Robot Inventor 51515 set. The goal of the attachment is to release a lever that is holding the wheel.

This attachment demonstrates pushing and pulling with a circular motion. It is useful for FIRST LEGO League competitions where you can grad a mission model and bring it back to base or push/pull on a lever.

These are instructions on how to build the:

• Cargo plane
• 1x Gray container

You can find more building instructions and tips and tricks about the competition at this page.

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Cell Phone mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Tire Flip mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.

Do you like playing bowling? How about playing it with a Mindstorms 51515 Robot Inventor set? Well, these are the building instructions for the bowling pins and "playground". In order to play bowling with a robot, you'll first have to build one. This particular construction was created to be used with Tricky - the smallest Inventor robot - and its Kick the ball attachment. You could later spice things up and try to play it with the Turning attachment for Tricky.

You can find the LEGO set, with which this was built, by following this link.

You can find constructions created to play with Tricky, by following the links below:

1. Football Goal
2. Chain Reaction
3. Basketball hoop

These are instructions on how to build the:

• Rowing Machine

You can find more building instructions and tips and tricks about the competition on this page.

This is the attachment to accomplish Fll 2019 M07 mission with the Dominator robot. You can see how to attach the attachment to the robot in this tutorial.