This attachment demonstrates pushing and pulling with a circular motion. It is useful for FIRST LEGO League competitions where you can grad a mission model and bring it back to base or push/pull on a lever.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition at this page.
This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Bench mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.
This magical wardrobe is for little dolls wear and bags. It could be a part of every doll play at any time. Yes. We have daughters.
Do you like playing bowling? How about playing it with a Mindstorms 51515 Robot Inventor set? Well, these are the building instructions for the bowling pins and "playground". In order to play bowling with a robot, you'll first have to build one. This particular construction was created to be used with Tricky - the smallest Inventor robot - and its Kick the ball attachment. You could later spice things up and try to play it with the Turning attachment for Tricky.
You can find the LEGO set, with which this was built, by following this link.
You can find constructions created to play with Tricky, by following the links below:
So I was looking around the house and I thought- "This will be fun for the kids. Let's build a coffee machine". Little did I know how fun it will be. Built from LEGO SPIKE Core set 45678 + LEGO SPIKE Expansion Set 45680 this Coffee Machine has a lit that could be opened/closed and is with the right size for the hands of an 6-10 years old child. What my daughters did with it is to have some coffee with the other toys. It is fun for them to construct and was really interesting that you can open and close it. As an engineer I had the chance to tell them a few words about the valve on the machine and why it is needed. Best ~2 hours of play for this week.
Play time for a week: ~2 hours in total
Този робот изглежда малко странно. Можете ли да познаете защо? Двигателите са разположени в противоположни посоки. Единият двигател е обърнат "напред", а другият е обърнат "назад". Това означава, че ако кажете на двата мотора да се въртят напред, роботът просто ще се върти! За да накарате робота да се движи напред, ще трябва да накарате единия двигател да се върти напред, а другия - назад.
Целта на този робот е да научи учениците, че двигателите могат да бъдат поставени по много различни начини. Не винаги двата двигателя са обърнати в една и съща посока и това трябва да се вземе предвид по време на програмирането.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
This is the attachment to accomplish Fll 2019 M07 mission with the Dominator robot. You can see how to attach the attachment to the robot in this tutorial.
Тази кутия е предназначена за употреба в мисии. Дългото ѝ тяло позволява да бъде захваната от голямо разнообразие от приспособления.
Това е модул, направен да прилича на глава и щипки на богомолка. Щипките се движат с помощта на среден мотор, а главата има ултразвуков сензор за очи. Този модул се използва в Mantissa, a LEGO Mindstorms EV3 mantis robot.
Това е механизъм за насочване на предните колела направен за ЛЕГО Майндстормс EV3, който използва Техник кормилна връзка за да насочи две колела. За да се задвижва, механизмът използва среден мотор. Този модул може да се свърже с други за да се направи готина кола с насочване.
These are instructions on how to build the:
for the FIRST LEGO League 2019-2020 City Shaper Challenge.
You can find more building instructions and tips and tricks about the competition on this page.
- you should attach it to the motor, depending on the orientation of the motor
This is the initial construction of a catapult. The base on which we will place the rest of the robot. The goal of this construction is to give the catapult the ability to rotate.
This is an attachment for the Kriket Box robot that accomplishes multiple missions. The missions are connected with Push and Collect actions and are from the FIRST LEGO League 2022-2023 SUPER POWERED competition. The attachment is a little different than the recording because we improved it a little after that
This attachment is a great example for a precise drop attachment. It is designed for the Kriket Box Robot and accomplishes the M14 Toy Factory mission from the FIRST LEGO League 2022-2023 SUPER POWERED competition.
