Building Instructions -

• Java

Background

The chance of a “serious” meteoroid hitting earth in our lifetime is extremely low, but it’s not zero, and the devastation could truly wipe us out. How will scientists and engineers keep us safe?

Mission

From west of the free-line, send one or both meteoroids independently to the meteoroid catcher. “Independently”: see also M01, Section “Scoring Requirements”.

Scores

• Meteoroid(s) touch(es) the mat in the centre section of the meteoroid catcher: 12 each
• Meteoroid(s) touch(es) the mat in either side section of the meteoroid catcher: 8 each
• Possible scores: 0, 8, 12, 16, 20, 24

Scoring Requirements

• The result must be visible at the end of the match.
• The meteoroids need to be sent over the free-line to touch the mat in the meteoroid catcher > Only allowed method. Must be observed by the referee.
• The meteoroids must be hit/released while they are clearly and completely west of the free-line. > Only allowed method. Must be observed by the referee.
• While between hit/release and scoring position, the meteoroid must be clearly independent. > Only allowed method. Must be observed by the referee.
• If ever the ring-set meteoroid is off its ring, you may remove the ring from the field by hand. This is a special exception to the rules.

(mission descriptions source https://www.first-lego-league.org/)

These are 3D Building Instructions for the Music Concert Lights and Sounds mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

These are 3D Building Instructions for the Sound Mixer mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

This is the robot that we use to demonstrate a solution for the World Robot Olympiad 2021 Junior competition. This is a Post season solution. We never release any solutions during the season as this will have a negative impact on the competition.

We started with this robot and it has a few good ideas. It can collect two cars at the same time. We later decided to go for a more powerful robot. Check out WRO 2021 Junior: Slaimi - a post season WRO competition solution robot

Here are the building instructions for the Turning attachment for Tricky - the Mindstorms 51515 Robot Inventor robot. Tricky might be the smallest robot, built with this set, but it will surprise you with its abilities to spin the ball. If you build this Turning attachment for Tricky, you could try to play a crazy little bowling game with it. As the robot is spinning the ball, you can program it to move forward and then stop, so the ball could go forward (hopefully towards the bowling pins). You can play to see who will be the first to make a strike. The Mindstorms/Duplo ball and the bowling pins are included in the set.

You can find the LEGO set, with which this was built, by following this link

You can find other attachments for Tricky, by following the links below:

1. Basketball attachment
2. Kick the ball attachment
3. Writing attachment
4. Ball grabbing attachment

You can find constructions created to play with Tricky, by following the links below:

1. Bowling Pins
2. Football Goal
3. Chain Reaction
4. Basketball hoop

These are the building instructions for the Writing attachment for Tricky - the Mindstorms 51515 Robot Inventor's smallest robot. If you build this attachment, you can program Tricky to write different things with its pen by moving. The animation in the instructions below will give you a better perspective for its abilities.

You can find the LEGO set, with which this was built, by following this link.

You can find other attachments for Tricky, by following the links below:

1. Basketball attachment
2. Kick the ball attachment
3. Ball grabbing attachment
4. Turning attachment

You can find constructions created to play with Tricky, by following the links below:

1. Bowling Pins
2. Football Goal
3. Chain Reaction
4. Basketball hoop

These are instructions on how to build the:

• Weight Machine

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• White Building Units
• Blue Building Units
• Building Upgrades

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

This is the field used in FLLCasts Off-season Challenge 2019. The pdf should be downloaded and printed 1:1. It is best if it is printed on durable canvas such as vinyl. Although we do not recomend it, the field can be printed on regular paper.

This is the attachment of Team "Nightbeast", with which they :
1. Inserts the Tube Module into the Habitation Hub port, west side 
2. Move all four Core Samples so they are no longer touching the axle that held them in the Core Site Model
3. Place the Gas Core Sample completely in Base
From missions M05 and M06 from FLL Into Orbit Challenge
 

This is a little robot that doesn't like its switch touched. It will return the switch back every time it's touched and react in a variety of ways.

The program for controlling the robot is available at /programs/wc7iqy-program-for-ev3-finger-bot

This are the building instructions for a mechanism, collecting cubes. It is designed as an attachment for VEX Robot Base 5 and can be used to solve the VEX IQ Challenge High rise 2014-2015.

It's a VEX IQ robot base with all VEX IQ Sensors. The robot has 1 x Gyro, 1 x Ultrasonic, 1x Color Sensor, 2 x Toch Sensors, 1 x Touch Led Sensor.

Building instructions for the LEGO Mindstorms robot attachment used at the FIRST LEGO League Natures Fury Competition. This robot attachment takes two of the building and moves them without demolishing them. It is a good example of the use of gear wheels and worm gear. The gear wheels move levers in opposite directions. 

These are 3D Building Instructions for M05 Shark mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Shark for additional building possibilities.

This attachment is accomplishing three missions and partly two more missions from the FIRST LEGO League 2022-2023. It is for the Chain Monster robot