This LEGO attachment connects a LEGO Mindstorms EV3 Motor with a LEGO Technic Linear Actuator. The connection is through a couple of gears which makes the whole instructions quite interesting and useful as an example.
The attachment was used during FIRST LEGO League 2014 Robotics competition.
With this LEGO Education SPIKE Prime attachment we accomplish the basketball mission from the FIRST LEGO League 2020 RePlay competition. The goal of the mission is to put the ball into the basket and to have the basket up at the end of the round. This is a complex attachment. It uses gear wheels and warm gears to transfer the power from the motor to the top of the attachment. At the top of the attachment there is a wheel with a rope. The rope is build with LEGO Education SPIKE Prime parts. If you have the chance, use a different LEGO rope, but if you don't that this one will be ok.
Това е още един ЛЕГО Майндстормс хващач, но този път той има 4 пръста! Те се движат едновременно с помощта на среден мотор. Този хващач е взет от Крон - Лего кран.
Тази конструкция е взета от тук. Тя е малко модифицирана, така че да можете да я конструирате от един EV3 комплект. Споделяме я, защото разбираме, че е гениална. Ние сме "разочаровани" в доброто значение на думата, защото не сме я измислили ние. Надяваме се, че ще ви забавлява колкото ни забавлява и нас.
Смятаме, че това нещо е перфектен пример за балансиране, който ще накара много от близките ви да си почешат главите чудейки се как работи. Трябва да бъдете точни с дължината на въжетата! Най-хубавото е, че не е нужно да програмирате нищо.
Забавлявайте се и късмет!
This robot is a spin-off of the Useless machine built from LEGO Mindstorms EV3. This robots mission is to be the last to press the button it holds.
This is an 8 bar lifting robot. Way should I build this instead of Roberto bot you ask? Because it is... well... it lift thing straight up, it lift 'em higher, it's more beautiful than Roberto and is more bad ass looking than 4 bar lifting mechanism. OOoohhh, and one more thing it may use the same program as Roberto Bot With Four Bars Lifting Mechanism.
The program si at programs/hb5rj8-pesho-bot-with-two-bars-lifting-mechanism-controls-with-modkit.
This WRO robot is designed to collect a lot of ping pong balls in its container. It's built with LEGO Mindstorms EV3 45544 and 45560 sets. These are the LEGO Educational sets. The robot has two chains that collect the balls and push them into the container attachment. This is one of the larges robots we've uploaded at FLLCasts yet. You could learn a lot by following the building instructions and paying attention to the details of how this robot is built. All the alignment, all the connections. Really beautiful.
Robot for collecting ping pong balls used in the World Robotics Olympiad competitions. It is constructed with LEGO Mindstorms EV3
These are building instructions for one of the greatest LEGO Mindstorms attachments that we've built. Super simple and easy to follow and at the end, you have an attachment with a rubber band that controls a lever and that could lift objects from the field. It could lift them up. Also because it is with a rubber band you don't need a motor and you could use the motor for other attachments.
This attachment is accomplishing three missions from the FIRST LEGO League 2022-2023. It is for the Chain Monster robot
These are 3D Building Instructions for the Theater Scene Change mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.
This is an attachment for the Kriket box robot. It demonstrates how to build attachments that glide over the robot, are pinless and could be quickly and easily replaced and changed with another attachment. This attachment also lifts. Quite cool. Quite cool.
Мотивиран от петминутния робот, този робот си има собствени релси!
These are the official robot rules for the FIRST LEGO League Hydrodynamics 2017-2018 robot missions.
This is a very funny robotics hand that you could place on your hand and control with your fingers. Actually quite funny to point at things, to move the three fingers. There are also many things to learn from the gears and its constructions.
It is true that it requires a lot of parts, but its worth it.
Our Lander doesn’t have working parachutes, thrusters, or cushions, but one important feature is realistic … it’s very fragile.
Get the lander to one of its targets intact, or at least get it to base.
(mission descriptions source https://www.first-lego-league.org/)
Robot building instructions for a World Robot Olympiad with a large container used for collecting ping-pong balls
Building instructions for the One Attachment. Built from LEGO Mindstorms EV3 parts and with an Ultrasonic sensor we've used this attachment to accomplish most of the missions at FIRST LEGO League 2013.
SIngle robot attachment, many points.
