Building Instructions -

• Java

Pallo, from Ancient Greek, means "to throw" or "to hurl"—a root of the modern word "catapult".

Pallo is a robot made of two parts. The first part is the catapult! It contains no electronic components and uses two rubber bands to launch a projectile toward the second part. The second part is the target. It features a color sensor which, using a piston with differently colored sections, detects how accurately the target has been hit. Good luck with the shooting!

With this attachment we complete the Elevator and Steel construction for the FIRST LEGO League 2019-2020 competition. The attachment is placed on the Whakatae - LEGO Education SPIKE Prime Competition Box robot

Alice is a lovely little bird, with some amazing mechanisms on her feet. It uses two large motors and one medium one as a head, which drives both its wings.

Vex IQ robot base which could be used with different attachments. The gravity center of this robot is in the backside and it has a lot of space in front for attachments.

Background

To live away from earth, it would help if we were good at detecting and mining resources under the surfaces of other planets, moons, asteroids, and even comets.

Mission

The robot needs to get all the core samples out of the core site model, then it has options for what to do with them as described here, and in mission M03.

Scores

• Move all four core samples so they are no longer touching the axle that held them in the core site model: 16
• Place the gas core sample so it is touching the mat, and completely in the lander’s target circle: 12 OR
• Place the gas core sample completely in base: 10
• Place the water core sample so it is supported only by the food growth chamber: 8
• Possible Scores: 0, 16, 24, 26, 28, 34, 36

Scoring Requirements

• Results must be visible at the end of the match.

(mission descriptions source: https://www.first-lego-league.org/)

Building instruction for both EV3 and NXT. The whole catapult is build in exactly 78 steps.

This robot is a spin-off of the Useless machine built from LEGO Mindstorms EV3. This robots mission is to be the last to press the button it holds.

A similar LEGO attachment the previous once, but this one is with a different gear ratio. Again using a frame, two axles and two gears you can change the direction of the motion.  

This attachment is accomplishing three missions from the FIRST LEGO League 2022-2023. It is for the Chain Monster robot

Interesting and useful attachment for dropping a LEGO human at a specific location. It uses a lever and a gear wheel. When the lever is pressed the wheel rotates.

The attachment is constructed from LEGO Mindstorms EV3 sets.

This is an attachment for the Kriket box robot. It demonstrates how to build attachments that glide over the robot, are pinless and could be quickly and easily replaced and changed with another attachment. This attachment also lifts. Quite cool. Quite cool.

With this LEGO Education SPIKE Prime attachment we accomplish the basketball mission from the FIRST LEGO League 2020 RePlay competition. The goal of the mission is to put the ball into the basket and to have the basket up at the end of the round. This is a complex attachment. It uses gear wheels and warm gears to transfer the power from the motor to the top of the attachment. At the top of the attachment there is a wheel with a rope. The rope is build with LEGO Education SPIKE Prime parts. If you have the chance, use a different LEGO rope, but if you don't that this one will be ok.

This robot was designed for the VEX IQ Challenge 2019-2020. It could push four hubs simultaneously. It can carry one. And it call pull itself on the bar at the end of the run. We've used four omni wheels of which the two at the back are the driving wheels.

Demo program can be found at Program for Winner - VEX IQ Competition Robot for the 2018-2019 Challenge.

VEX IQ robot base for Cube Collector 2