Building Instructions -

• Ubuntu

VEX IQ version of an Easy Bot. It's simple and appropriate for classes of students. 

"Do. Or do not. There is no try!"

You probably remember this famous line spoken by Yoda in the film "Star Wars Episode V: The Empire Strikes Back". We've created FREE 3D and animated building instructions of LEGO's Star Wars "The Child (75318)" build-and-display model. Except the obvious cuteness overload, we did our best to create the 3D steps in the easiest way possible, so you DO manage to build "Baby Yoda" successfully, because trying is not an option. Fun you shall have, in 3D you shall build! Ready to go?

To embed this instruction on your website visit it at (buildin3d.com)

Pallo, from Ancient Greek, means "to throw" or "to hurl"—a root of the modern word "catapult".

Pallo is a robot made of two parts. The first part is the catapult! It contains no electronic components and uses two rubber bands to launch a projectile toward the second part. The second part is the target. It features a color sensor which, using a piston with differently colored sections, detects how accurately the target has been hit. Good luck with the shooting!

Alice is a lovely little bird, with some amazing mechanisms on her feet. It uses two large motors and one medium one as a head, which drives both its wings.

Background

Space is quiet and beautiful, but with almost no heat, air, nor air pressure, it could freeze, suffocate, and boil you all at once! Help our spacewalking astronaut “Gerhard” get to safety.

Mission

The robot needs to get Gerhard’s body into the airlock chamber.

Scores

• Astronaut completely in the habitation hub’s airlock chamber: 22 OR
• Astronaut partly in the habitation hub’s airlock chamber: 18
• Possible scores: 0, 18, 22

Scoring Requirements

• For this mission, the word “body” includes all parts except the loop.
• Results must be visible at the end of the match.

(mission descriptions source https://www.first-lego-league.org/)

This robot is a spin-off of the Useless machine built from LEGO Mindstorms EV3. This robots mission is to be the last to press the button it holds.

Vex IQ robot base which could be used with different attachments. The gravity center of this robot is in the backside and it has a lot of space in front for attachments.

Background

To live away from earth, it would help if we were good at detecting and mining resources under the surfaces of other planets, moons, asteroids, and even comets.

Mission

The robot needs to get all the core samples out of the core site model, then it has options for what to do with them as described here, and in mission M03.

Scores

• Move all four core samples so they are no longer touching the axle that held them in the core site model: 16
• Place the gas core sample so it is touching the mat, and completely in the lander’s target circle: 12 OR
• Place the gas core sample completely in base: 10
• Place the water core sample so it is supported only by the food growth chamber: 8
• Possible Scores: 0, 16, 24, 26, 28, 34, 36

Scoring Requirements

• Results must be visible at the end of the match.

(mission descriptions source: https://www.first-lego-league.org/)

Building instruction for both EV3 and NXT. The whole catapult is build in exactly 78 steps.

A similar LEGO attachment the previous once, but this one is with a different gear ratio. Again using a frame, two axles and two gears you can change the direction of the motion.  

This is an attachment for the Kriket box robot. It demonstrates how to build attachments that glide over the robot, are pinless and could be quickly and easily replaced and changed with another attachment. This attachment also lifts. Quite cool. Quite cool.

This robot was designed for the VEX IQ Challenge 2019-2020. It could push four hubs simultaneously. It can carry one. And it call pull itself on the bar at the end of the run. We've used four omni wheels of which the two at the back are the driving wheels.

Demo program can be found at Program for Winner - VEX IQ Competition Robot for the 2018-2019 Challenge.

This is an 8 bar lifting robot. Way should I build this instead of Roberto bot you ask? Because it is... well... it lift thing straight up, it lift 'em higher, it's more beautiful than Roberto and is more bad ass looking than 4 bar lifting mechanism. OOoohhh, and one more thing it may use the same program as Roberto Bot With Four Bars Lifting Mechanism.

The program si at programs/hb5rj8-pesho-bot-with-two-bars-lifting-mechanism-controls-with-modkit.